Sanyo VPC CA6 Instruction Manual, VPC-CA65EX - Page 184

Shooting Monitor Problem When zooming in or out, the zoom movement stops momentarily. There is noise in the captured image. When recording a video clip under fluorescent lights, a noticeable flicker appears in the image. During video clip recording, recording momentarily stops. No playback image appears. Cause The optical zoom has moved to the maximum magnification position. The ISO sensitivity setting is too high. This occurs when the shutter speed is too fast. You captured a still image during video clip recording. The camera is not in the playback mode. Action Not a malfunction. Release the [T] button, and press it again. Set the ISO sensitivity to a lower setting. Set the ISO sensitivity to v or less. Not a malfunction. When a still image is captured during video clip recording, recording briefly stops while the image is being saved. Video clip recording resumes after the still image is saved. Press the REC/ PLAY button to switch to the playback mode. Reference page 57 82 82 52 42, 47, 56 English 168