Sanyo VPC-CG9 Instruction Manual, VPC-CG9EX - Page 69

SIMPLE/SHOOTING HINT Adjusting the monitor brightness i While the Shooting Screen is active, you can quickly access the screen for adjusting the brightness of the monitor (page 140) by pressing the MENU button for at least 1 second. What is the camera focusing on? i A target mark & on the monitor Target mark shows the area the camera is focusing on. i The camera automatically determines the correct focus by measuring from 9 different focus points within the shooting area. If the target mark is at a position that is different from the point you wish to F3.5 1/7 focus on, you can refocus, for example, by changing the shooting Camera shake icon angle. Shutter speed i The large target mark appears when the camera focuses on a wide area Aperture in the center of the screen. The focus can be locked i By assigning an operation shortcut to the SET button (page 135), you can set the autofocus or the aperture to a fixed setting. When the aperture setting is fixed, the P icon appears on the monitor; when the autofocus setting is fixed, the p icon appears on the monitor. i When the focus range (page 57) setting is changed, the focus lock is released. The shutter speed and aperture are displayed i In the NORMAL mode, the shutter speed and aperture settings are shown on the Shooting Screen. You can use them as a reference when shooting. If the camera shake icon > appears... i During still image shooting, if the shutter speed is slow and the possibility that the image may be blurred due to camera shake becomes high, the camera shake icon may appear on the monitor. In this case, use a tripod to stabilize the camera when shooting, or set the flash operation mode to automatic (page 63). i When shooting with the scene select function set to the fireworks + mode, the camera shake icon always appears, but this is normal. English 62