Sanyo WXU10 Instruction Manual, PLC-WXU10B - Page 29
Image (Video Mode), Aspect, ANAMORPHIC Video only, Freeze
View all Sanyo WXU10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Image (Video Mode) Aspect Use this function to choose your desired image size. Q 4:3 : Change the original aspect 1:1 to 4:3 at the composite video input or S-video input. Q 1 TO 1 : Keep the image with original width-height ratio at the component input. Q FILL ALL : The input source will be scaled to fit the projection screen. Q ANAMORPHIC : Maintain the original aspect ratio in the center of the output image and place the majority of the distortion towards the horizontal edges of the image. ANAMORPHIC (Video only) 1280 X 800 16:9 No matter what input signal is, out put aspect ratio is 16:9 and fit to the whole screen. Freeze Q Choose "ON" to freeze the screen image. Q Choose "OFF" to unfreeze the screen image. EN-28
EN-28
16:9
Image (Video Mode)
Aspect
Use this function to choose your desired image size.
4 : 3
: Change the original aspect 1:1 to 4:3 at the composite video input
or S-video input.
1 TO 1
: Keep the image with original width-height ratio at the component input.
FILL ALL
: The input source will be scaled to fit the projection screen.
ANAMORPHIC : Maintain the original aspect ratio in the center of the output image
and place the majority of the distortion towards the horizontal edges
of the image.
ANAMORPHIC (Video only)
Freeze
Choose “ON” to freeze the screen image.
Choose “OFF” to unfreeze the screen image.
1280 X 800
No matter what input signal is, out
put aspect ratio is 16:9 and fit to the
whole screen.