Sanyo WXU700 Instruction Manual, PLC-WXU700 Memory Viewer Function - Page 5
Entering the memory viewer mode, Input, SELECT, Network, Memory viewer, Start - windows
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Entering the memory viewer mode In case of already USB thumb drive is inserted into the USB port on the rear terminal of the projector and you want to enter the memory viewer mode again: 1. Select Input in the main-menu, press Point 8 or SELECT buttons, select Network in the sub-menu, and then press SELECT button, or press NETWORK button on the remote control. * After short time, the network connection standby display screen "Ready for use" will appear. 2. Select Network in the main-menu and then press SELECT button. 3. Select Memory viewer with Point ed buttons and press SELECT button. 4. Select Start and press SELECT button. The image file stored in the root directory of the USB thumb drive is displayed on the screen. * If the image file is not available in the root directory of the USB thumb drive, the memory viewer browser window appears.