Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 66
Power control and status check, PJ status, PJ temp.
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Chapter 7 Controlling the projector Power control and status check Click Power & Status on the main menu. The control page will be displayed. By clicking ON or Standby button on the page, the power of the projector can be controlled. Confirmation window as shown in the below appears when the Standby button is pressed. Popup confirmation window Item Description PJ status Power Displays the status of the lamp. (ON, OFF, On starting up, On cooling down) Status Displays the status of the projector's power. (Refer to next page.) Power control Controls the projector power by clicking the "ON" or "Standby" button. PJ temp. Inside temp.A Displays the surrounding temperature of lamp in the projector. Inside temp.B Displays the surrounding temperature of panel in the projector. External temp Displays the surrounding temperature of the intake vent The warning icon will appear if the temperature exceeds a specified value. Check if there is no object to obstruct the airflow around the intake or exhaust vent. It might be airfilter clogged. Clean up the airfilter. * The temperature unit can be set either Centigrade or Fahrenheit in the item "Initial Setting". (+p.52) ✐ The projector cannot be turned on while the projector is cooling down. ✐ The web browser checks and updates the projector's condition every 30 seconds automatically. 66