Schwinn 145 Upright Bike Assembly and Owner's Manual - Page 14
Attach Water Bottle Holder to Console Mast, Connect AC Adapter to Frame Assembly, Final Inspection
![]() |
View all Schwinn 145 Upright Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
11. Attach Water Bottle Holder to Console Mast Note: H ardware is pre-installed on Mast and not on Hardware Card. 15 12. Connect AC Adapter to Frame Assembly 12 13. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Be sure to record the serial number in the field provided at the front of this manual. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 14
![](/manual_guide/products/schwinn-145-upright-bike-assembly-amp-owners-manual-a5ca38e/14.png)
14
11.
Attach Water Bottle Holder to Console Mast
Note:
Hardware is pre-installed on Mast and not on Hardware Card
.
12.
Connect AC Adapter to Frame Assembly
12
13.
Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Be sure to record the serial number in the field provided at the front of this manual.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the
Owner’s Manual.
15