Schwinn 16in Gremlin Schwinn Owner's Manual - Page 42
Disc Brake
View all Schwinn 16in Gremlin manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Cable adjusƟng barrel Handlebar Grip Brake lever Cable head Ferrule Disc Brake If the brake cable is not connected at the brake lever, line up brake barrel slots with brake lever slot before installing the cable. Then slide the head of the brake cable into the brake lever per the diagram, and thread the cable through the slot in the brake lever so the cable end rests squarely in the adjustment barrel or cable end rests in the recess of the brake lever. (Fig. 3.37) If the brake cable is disconnected at the disc caliper, thread the brake wire through the adjustment barrel, loosen the cable anchor bolt until you can see a hole through the anchor bolt for the cable wire to attach, thread the cable wire through the cable anchor and snug the cable anchor by hand. (Fig. 3.38) 3.37 Fork leg Cable anchor bolt ASSEMBLY 3.38 42 ©2010