Schwinn 222 Recumbent Bike Assembly Manual - Page 9
Step 3, Tighten Bolts., Finished seat should look like picture below
![]() |
View all Schwinn 222 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Step 3: Attach SEAT (#23) to SEAT FRAME (#26) with 4 ALLEN BOLTS 45mm (#25) and 4 WASHERS (#15). Tighten Bolts. Step 4: Attach SEAT BACK (#27) to SEAT FRAME (#26) with 4 ALLEN BOLTS 45mm (#25) and 4 WASHERS (#15). Tighten Bolts. Note: Finished seat should look like picture below:
![](/manual_guide/products/schwinn-222-recumbent-bike-assembly-manual-87f42ba/9.png)
Step 3:
Attach SEAT (#23) to SEAT FRAME (#26) with 4 ALLEN BOLTS 45mm
(#25) and 4 WASHERS (#15).
Tighten Bolts.
Step 4:
Attach SEAT BACK (#27) to SEAT FRAME (#26) with 4 ALLEN BOLTS
45mm (#25) and 4 WASHERS (#15).
Tighten Bolts.
Note:
Finished seat should look like picture below: