Schwinn 230 Recumbent Bike 2007 model Assembly Manual - Page 20
Step 12 Install Computer
View all Schwinn 230 Recumbent Bike 2007 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ASSEMBLY INSTRUCTIONS Step 12 Install Computer Parts: • Computer (Ref. A ) Tools: • Supplied Phillips Head Screwdriver 12-1 Remove the four screws from the back of the Computer. 12-2 Connect the Computer Wire and Heartrate Wire to the connectors on the back of the Computer as shown. 12-3 Align the Computer with the holes in the Computer Bracket. (A-1) 12-4 Install and completely tighten the hardware. A A-1 18
ASSEMBLY INSTRUCTIONS
18
Step 12 Install Computer
Parts:
•
Computer
(Ref. A )
Tools:
• Supplied
Phillips Head Screwdriver
12-1
Remove the four screws from the back of the Computer.
12-2
Connect the Computer Wire and Heartrate Wire to the
connectors on the back of the Computer as shown.
12-3
Align the Computer with the holes in the Computer Bracket.
(A-1)
12-4
Install and completely tighten the hardware.
A
A-1