Schwinn 490 Elliptical Assembly and Owners Manual - Page 22

Cut the Shipping Zip-Ties that Secure the Lower Handlebars. Attach the Pedals to

Get Schwinn 490 Elliptical PDF manuals and user guides View all Schwinn 490 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

11. Cut the Shipping Zip-Ties that Secure the Lower Handlebars. Attach the Pedals to the Frame Assembly. In order to avoid possible serious injury, when inserting the end of the Pedal into the Lower Handlebar be careful to avoid fingers or hands being caught or pinched. Be sure to stay out of the path of the Handlebars. Note: D o not fully rotate the Lower Handlebars or damage to the cables in the Handlebars will occur. When inserting the Pedals into the Legs, be sure that the post is centered with the opening of the Leg. Lubricant has been applied to some of the hardware involved with this step. Be sure to have a cloth or paper towel available to wipe any excess lubricant off of your hands after installation. * Hardware is not supplied in the Hardware Bag. ** Using the 19mm wrench, slightly rotate the Pivot Pin to assist with a proper set. Be sure the key on the Pivot Pin is fully set into the notch on the Lower Handlebar. The Pivot Pin will be flush with the outside of the Lower Handlebar when properly set. X2 6mm B X2 ** C 14 X2 * X2 6mm * 22 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
22
11.
Cut the Shipping Zip-Ties that Secure the Lower Handlebars. Attach the Pedals to the
Frame Assembly.
In order to avoid possible serious injury, when inserting the end of the Pedal into the Lower Handlebar be
careful to avoid fingers or hands being caught or pinched. Be sure to stay out of the path of the
Handlebars.
Note:
Do not fully rotate the Lower Handlebars or damage to the cables in the Handlebars will occur.
When
inserting the Pedals into the Legs, be sure that the post is centered with the opening of the Leg. Lubricant has
been applied to some of the hardware involved with this step. Be sure to have a cloth or paper towel available to
wipe any excess lubricant off of your hands after installation. * Hardware is not supplied in the Hardware Bag.
**
Using the 19mm wrench, slightly rotate the Pivot Pin to assist with a proper set. Be sure the key on the Pivot
Pin is fully set into the notch on the Lower Handlebar. The Pivot Pin will be flush with the outside of the Lower
Handlebar when properly set.
X2
*
11
14
6mm
X2
*
X2
X2
**
B
6mm
C