Schwinn A25 Recumbent Bike Assembly and Owner's Manual - Page 11
Install Console Mast to Main Assembly, Install the Console to the Console Mast
View all Schwinn A25 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
7. Install Console Mast to Main Assembly Note: You can attach a wire (or string) to the Console Cable and HR Cable to help pull the cables through the Console Mast. NOTICE: D o not crimp cables. X3 D B 6mm 8. Install the Console to the Console Mast Note: Hardware is pre-installed on Console and not on Hardware Card. Remove hardware from Console before you connect the cables. NOTICE: D o not crimp cables. Make sure that the switch on the back of the Console is set to B (bike). 10 #2 11
11
7. Install Console Mast to Main Assembly
Note:
You can attach a wire (or string) to the Console Cable and HR Cable to help pull the cables through the
Console Mast.
NOTICE:
Do not crimp cables.
X3
B
D
6mm
8. Install the Console to the Console Mast
Note:
Hardware is pre-installed on Console and not on Hardware Card. Remove hardware from Console before you
connect the cables.
NOTICE:
Do not crimp cables. Make sure that the switch on the back of the Console is
set to
B
(bike).
10
#2