Schwinn Airdyne Evolution Comp Owner's Manual - Page 14
Display SCAN Function
View all Schwinn Airdyne Evolution Comp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
OPERATION Display SCAN Function The SCAN buttons will allow you to choose which information on each display line you wish to view, OR, you can select the SCAN mode (when the SCAN icon is displayed) and the display line information will automatically change (every five seconds.) For example, the Top Display Line shows TIME and distance (MILES or KM.) By pressing the SCAN 1 button, the "scanning loop" on the Top Display Line looks as follows... Display TIME MILES TIME SCAN 1 TIME (Press SCAN 1 button) (Press SCAN 1 button) (Press SCAN 1 button) etc. Again, when the SCAN 1 Icon is shown (step 3), the information will automatically change between TIME and MILES every five seconds. When the computer is in the "home" mode, the Scan status of each Display Line will carry over from one exercise to the next. This allows you to set which specific bio feedback information is most important to you, and that will become the default setting for your next workout. 14