Schwinn Vantage F1 Schwinn Owner's Manual - Page 46
FRONT FENDER - if equipped
View all Schwinn Vantage F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
ASSEMBLY 46 ©2010 FRONT FENDER - if equipped The front fender is mounted at the fork crown. There are two ways in which to mount your front fender. The first is the caliper brake mounting system (see Fig. 3.45), and the second is the 10mm nut and bolt system (see Fig. 3.46). Identify the mounting system used on your bicycle and follow the given instructions for that particular type of mounting system. (Fig. 3.45) Caliper Brake Mounting System First remove the front wheel from your bicycle. Remove the hex nut from the caliper brake bolt on the rear of the fork, and slide the brake assembly from the fork. Place 3.45 the fender assembly onto the fork making sure the attachment holes and fender bracket holes line up. Reattach the caliper brake making sure that the brake arms are on each side of the fender. Tighten the bolt until secure. (Fig. 3.46) 10mm Nut and Bolt Mounting System First remove the front wheel from your bicycle. Place the fender assembly onto the fork making sure the attachment holes and fender bracket holes line up. Attach the fender with the 10mm hex bolt and nut. Tighten the bolt until secure. 3.46