Seagate Cheetah 15K Cheetah 15K.5 SAS Product Manual - Page 15
Reliability, Formatted capacities, Programmable drive capacity, Factory-installed accessories - 5 model st3300655ss
View all Seagate Cheetah 15K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3.4 Reliability • 1,400,000 hour MTBF (Annualized Failure Rate (AFR) of 0.62%) • Incorporates industry-standard Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.) • 5-year warranty 3.5 Formatted capacities Standard OEM models are formatted to 512 bytes per block. The block size is selectable at format time and must be a multiple of 4 bytes. Users having the necessary equipment may modify the data block size before issuing a format command and obtain different formatted capacities than those listed. To provide a stable target capacity environment and at the same time provide users with flexibility if they choose, Seagate recommends product planning in one of two modes: 1. Seagate designs specify capacity points at certain block sizes that Seagate guarantees current and future products will meet. We recommend customers use this capacity in their project planning, as it ensures a stable operating point with backward and forward compatibility from generation to generation. The current guaranteed operating points for this product are: Capacity (Blocks) ST3300655SS Sector Size Decimal Hex 512 585,937,500 22ECB25C 520 573,653,847 22314357 524 566,007,800 21BC97F8 528 557,874,778 21407E5A ST3146855SS Decimal Hex 286,749,488 11177330 280,790,184 10BC84A8 275,154,368 106685C0 272,662,935 10408197 ST373455SS Decimal 143,374,744 140,395,092 137,577,184 136,331,467 Hex 88BB998 85E4254 83342E0 82040CB 2. Seagate drives also may be used at the maximum available capacity at a given block size, but the excess capacity above the guaranteed level will vary between other drive families and from generation to generation, depending on how each block size actually formats out for zone frequencies and splits over servo bursts. This added capacity potential may range from 0.1 to 1.3 percent above the guaranteed capacities listed above. Using the drives in this manner gives the absolute maximum capacity potential, but the user must determine if the extra capacity potential is useful, or whether their assurance of backward and forward compatibility takes precedence. 3.6 Programmable drive capacity Using the Mode Select command, the drive can change its capacity to something less than maximum. See the Mode Select (6) parameter list table in the SAS Interface Manual, part number 100293071. A value of zero in the Number of Blocks field indicates that the drive will not change the capacity it is currently formatted to have. A number other than zero and less than the maximum number of LBAs in the Number of Blocks field changes the total drive capacity to the value in the Number of Blocks field. A value greater than the maximum number of LBAs is rounded down to the maximum capacity. 3.7 Factory-installed accessories OEM standard drives are shipped with the Cheetah 15K.5 SAS Installation Guide, part number 100384785, and the Safety and Regulatory Agency Specifications, part number 75789512 (unless otherwise specified). Cheetah 15K.5 SAS Product Manual, Rev. E 9