Seagate LD25 Product Manual - Page 9
Drive specifications - model
View all Seagate LD25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the ST9402115AS and ST920217AS models. 2.1 Specification summary table The specifications listed in this table are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual. Table 1: Drive specifications Drive specification Formatted Gbytes (512 bytes/sector)* Guaranteed sectors Bytes per sector Default sectors per track Default read/write heads Default cylinders Physical read/write heads Discs Recording density in BPI (bits/inch max) Track density TPI (tracks/inch max) Areal density (Gbits/inch2 max) Spindle speed (RPM) Internal transfer rate (Mbytes/sec max) I/O data transfer rate (Mbytes/sec max) ATA data-transfer modes supported Cache buffer (Mbytes) Height (max) Width (max) Length (max) Weight (typical) Average latency (msec) Power-on to ready (sec typical) Standby to ready (sec typical) Track-to-track seek time (msec typical) Average seek, read (msec typical) ST9402115AS ST920217AS 40 20 82,443,600 41,021,800 512 63 16 16,383 2 1 1 1 675,900 114,000 81 5,400 57.6 150 SATA 1.0, SATA II PIO modes 0-4 Multiword DMA modes 0-2 Ultra DMA modes 0-6 2 9.5 +/- 0.2 mm (0.374 +/- .0078 inches) 69.85 mm (2.75 +/- 0.0098 inches) 100.5078 +/- 1.57 mm (3.957 +/- 0.062 inches) 100 grams (0.22 lb) 5.6 4.0 3.0 1.0 (read), 1.5 (write)