Seagate Maxtor Central Axis Central Axis Network storage Server 2 Quick Start - Page 5

Create a Seagate Global Access Account: Step 1: In the Maxtor Manager application, click Web Access & Sharing at the top to go to the Web Access & Sharing window. Click Visit Web Access Site: Link your Seagate Global Access Account and your Central Axis Account: Step 1: In the Web Access & Sharing window, click Enable/Disable Web Access: Step 2: On the Seagate Global Access Sign In page, enter your email address below Don't Have an Account? and click Send. Step 3: Open your email and follow the instructions to complete the Global Access account registration. Step 2: Follow the on-screen instructions to enter your local Central Axis account information and then your Seagate Global Access account information. Note: Should the diagnostics in the Central Axis admin interface determine that a hard drive inside the storage server has failed, a single drive can be replaced by following the instructions available in the user documentation on the included CD and on www.maxtor.com in the support section. Macintosh Installation and Setup (OS X 10.4.11 or later) Part 3: Install the software. 1. Insert the Central Axis CD into your computer, open the CD, and double-click the Maxtor Central Axis Manager installer. 2. Follow the on-screen instructions to install the software. 3. When the software installation is complete, a Maxtor Central Axis Manager icon appears on your desktop: Part 4: Set up the Central Axis storage server. Here's what you'll do to set up your Central Axis storage server: • Set up your Central Axis storage server and create an administrator password. • Set up a user account. • Create a free Seagate Global Access account on the Seagate Global Access web site. • Link your Seagate Global Access account and your Central Axis account. 4. Double-click the Maxtor Manager icon. 5. Enter your Mac OS X password in the Authenticate window. The Maxtor Manager application opens on your desktop and searches for Central Axis devices on your network. When your Central Axis storage server is found, its ID and IP address are displayed. Note: If the message "No Central Axis storage server drives were found" appears, visit our support web site at http://support.seagate.com and click TROUBLESHOOTING for tips.