Seagate ST1000VX000 SV35.4 Series SATA Product Manual - Page 15
Typical current profiles, Conducted noise, Note., Voltage tolerance
View all Seagate ST1000VX000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2.8.1.1 Typical current profiles Figure 1. Typical 12V startup and operation current profile 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. • Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. • Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz. Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current. 2.8.3 Voltage tolerance Voltage tolerance (including noise): 5V ± 5% 12V ± 10% SV35.4 Series SATA Product Manual, Rev. B 9