Seagate ST120HM001 Seagate 600 SSD Product Manual - Page 23
Air flow
View all Seagate ST120HM001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3.5 COOLING Cabinet cooling must be designed by the customer so that the ambient temperature immediately surrounding the drive will not exceed temperature conditions specified in Section 2.8.1, "Temperature." The rack, cabinet, or drawer environment for the drive must provide heat removal. You shou ld confirm that adequate heat removal is provided using the temperature measurement guidelines described in Section 2.8.1. Forced air flow may be required to keep temperatures at or below the temperatures specified in Section 2.8.1 in which case the drive should be oriented, or air flow directed, so that the least amount of air flow resistance is created while providing air flow to the drive. Also, the shortest possible path between the air inlet and exit should be chosen to minimize the travel lentgh of air heated by the drive and other heat sources within the rack, cabinet, or drawer environment. If forced air is determined to be necessary, possible air-flow patterns are shown in figure 5. The air-flow patterns are created by one or more fans, either forcing or drawing air as shown in the illustrations. Conduction, convection, or other forced airflow patterns are acceptable as long as the temperature measurement guidelines of Section 2.8.1 are met. Above unit ote. Air flows in the direction shown (back to front) or in reverse direction (front to back) Under unit ote. Air flows in the direction shown or in reverse direction (side to side) Above unit Under unit Figure 5. Air flow Image may not represent actual product, for reference only. SEAGATE 600 SSD PRODUCT MANUAL, REV. B 19