Seagate ST240HM000 Seagate 600 SSD Product Manual - Page 31

Bit 5 6 8 9 10 11 12 13 14 Bit 0 1 2 3 4-7 8 9 10 11 12 13-15 Bit 0 1 2 3 4 5 6 7-15 Bit 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Word 69 Read zero after Trim is supported Optional ATA 28-bit commands supported Download Microcode DMA supported Set Max Password DMA and Set Max Unlock DMA supported Write Buffer DMA Supported Read Buffer DMA Supported DEVICE CONFIGURATION IDENTIFY DMA and DEVICE CONFIGURATION SET DMA are supported Long Physical Sector Alignment Error Reporting Control is supported Deterministic read after Trim is supported Word 76 Shall be cleared to zero Supports SATA Gen1 Signaling Speed (1.5Gb/s) Supports SATA Gen2 Signaling Speed (3.0Gb/s) Supports SATA Gen3 Signaling Speed (6.0Gb/s) Reserved for Serial ATA Supports the NCQ feature set Supports receipt of host initiated power management requests Supports Phy Event Counters Supports Unload while NCQ commands are outstanding Supports NCQ priority information Reserved for Serial ATA Word 78 Shall be cleared to zero Device supports non-zero buffer offsets Device supports DMA Setup auto-activation Device supports initiating power management Device supports in-order data delivery Reserved for Serial ATA Device supports Software Settings Preservation Reserved for Serial ATA Word 82 The SMART feature set is supported The Security feature set is supported Obsolete Mandatory Power Management feature set is supported PACKET feature set is supported Volatile write cache is supported Read look-ahead is supported Release interrupt is supported SERVICE interrupt is supported DEVICE RESET command is supported HPA feature set is supported Obsolete WRITE BUFFER command is supported READ BUFFER command is supported NOP command is supported Obsolete SEAGATE 600 SSD PRODUCT MANUAL, REV. B 27