Seagate ST3000DM001 Barracuda 7200.10 SATA Product Manual - Page 29

Barracuda 7200.10 Serial ATA Product Manual, Rev. K

23

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment

and formatting.

** 7200.10 family product achieved higher sustained data rate over same 7200.9 family capacity points using identical measurement

methodology.

*** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and

power to operational levels

.

Vibration, operating

5–22 Hz: 0.25 Gs, Limited displacement

22–350 Hz: 0.5 Gs

350–500 Hz:: 0.25 Gs

Vibration, nonoperating

5–22 Hz: 0.25 Gs, Limited displacement

22–350 Hz: 5.0 Gs

350–500 Hz:: 1.0 Gs

Drive acoustics, sound power

Idle***

2.8 bels (typical)

3.0 bels (max)

Quiet seek

3.0 bels (typical)

3.2 bels (max)

Nonrecoverable read errors

1 per 10

14

bits read

Annualized Failure Rate (AFR)

0.34%

Warranty

5 years on distribution units.

To determine the warranty for a specific drive, use a web

browser to access the following web page:

www.sea

gate.com/support/service/

From this page, click on the “Verify Your Warranty” link.

You will be asked to provide the drive serial number,

model number (or part number) and country of purchase.

The system will display the warranty information for your

drive.

Contact start-stop cycles

50,000 at 25°C, 50% rel. humidity

Supports Hotplug operation per the Serial ATA Revision 2.5 specification

Yes

Drive specification

ST380815AS

ST380215AS

Section	Page
1.0 Introduction	7
1.1 About the Serial ATA interface	8
2.0 Drive specifications	9
2.1 Specification summary tables	9
2.2 Formatted capacity	32
2.2.1 LBA mode	32
2.3 Default logical geometry	32
2.4 Recording and interface technology	33
2.5 Physical characteristics	34
2.6 Seek time	35
2.7 Start/stop times	35
2.8 Power specifications	36
2.8.1 Power consumption	36
2.8.1.1 Typical current profiles	37
2.8.2 Conducted noise	37
2.8.3 Voltage tolerance	37
2.8.4 Power-management modes	38
2.9 Environmental specifications	39
2.9.1 Ambient temperature	39
2.9.2 Temperature gradient	39
2.9.3 Humidity	39
2.9.3.1 Relative humidity	39
2.9.3.2 Wet bulb temperature	39
2.9.4 Altitude	39
2.9.5 Shock	39
2.9.5.1 Operating shock	39
2.9.5.2 Nonoperating shock	40
2.9.6 Vibration	40
2.9.6.1 Operating vibration	40
2.9.6.2 Nonoperating vibration	40
2.10 Acoustics	41
2.10.1 Test for Prominent Discrete Tones (PDTs)	41
2.11 Electromagnetic immunity	42
2.12 Reliability	43
2.12.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)	43
2.13 Agency certification	43
2.13.1 Safety certification	43
2.13.2 Electromagnetic compatibility	43
2.13.3 FCC verification	44
2.14 Environmental protection	45
2.14.1 European Union Restriction of Hazardous Substances (RoHS) Directive	45
2.14.2 China Restriction of Hazardous Substances (RoHS) Directive	45
2.15 Corrosive environment	45
3.0 Configuring and mounting the drive	47
3.1 Handling and static-discharge precautions	47
3.2 Configuring the drive	48
3.3 Serial ATA cables and connectors	48
3.4 Drive mounting	49
4.0 Serial ATA (SATA) interface	51
4.1 Hot-Plug compatibility	51
4.2 Serial ATA device plug connector pin definitions	52
4.3 Supported ATA commands	53
4.3.1 Identify Device command	55
4.3.2 Set Features command	59
4.3.3 S.M.A.R.T. commands	60
5.0 Seagate Technology support services	61
Index	63
A	63
B	63
C	63
D	63
E	63
F	63
G	63
H	63
I	64
K	64
L	64
M	64
N	64
O	64
P	64
Q	64
R	64
S	65
T	65
U	65
V	65

Seagate ST3000DM001 Barracuda 7200.10 SATA Product Manual - Page 29

ST380215AS

Page 29 highlights