Seagate ST31000520AS Barracuda LP Series SATA Product Manual - Page 28
Configuring and mounting the drive - warranty
![]() |
UPC - 890552658855
View all Seagate ST31000520AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
3.0 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic discharge (ESD) hazards. Observe the following standard handling and static-discharge precautions: Caution: • Before handling the drive, put on a grounded wrist strap, or ground yourself frequently by touching the metal chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire installation procedure. • Handle the drive by its edges or frame only. • The drive is extremely fragile-handle it with care. Do not press down on the drive top cover. • Always rest the drive on a padded, antistatic surface until you mount it in the computer. • Do not touch the connector pins or the printed circuit board. • Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination. 20 Barracuda LP Series SATA Product Manual, Rev. D
![](/manual_guide/products/seagate-st32000542as-barracuda-lp-series-sata-product-manual-078cff7/28.png)