Seagate ST3120213AS Product Manual - Page 41
Drive mounting
UPC - 000068127398
View all Seagate ST3120213AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3.4 Drive mounting You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 5 on page 33 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling. • Use only 6-32 UNC mounting screws. • The screws should be inserted no more than 0.150 inch (3.81 mm) into the bottom or side mounting holes. • Do not overtighten the mounting screws (maximum torque: 6 inch-lb). [1] 5.787 (146.9898) max. Recommended case temperature measurement location .138 (3.505) 1.122 + .020 (28.499 + .508) [1] 1.638 (41.605) [1] [1] 4.000 (101.6) 4.000 (101.60) .814 (20.676) CL of conn. Datum B 2.00 (50.80) CL of drive [1] 2 x 3.750 (2 x 95.25) .250 + .015 (6.35 + .381) (3x both sides) 1.028 max [1] (26.111 max) Notes: Dimensions are shown in inches (mm). [1] Dimensions per SFF-8301 specification 2 x 1.625 (2 x 41.28) [1] 2 (2 x x 1.750 44.45) [1] 4.000 (101.6) [1] Recommended case temperature measurement location Figure 5. Mounting dimensions-top, side and end view Barracuda 7200.9 Serial ATA Product Manual, Rev. D 33