Seagate ST31500541AS Barracuda LP Series SATA Product Manual - Page 30
Drive mounting
UPC - 715663213895
View all Seagate ST31500541AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
3.4 Drive mounting You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 3 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling. • Use only 6-32 UNC mounting screws. • The screws should be inserted no more than 0.150 inch (3.81 mm) into the bottom or side mounting holes. • Do not overtighten the mounting screws (maximum torque: 6 inch-lb). Recommended case temperature measurement location Figure 3. Mounting dimensions (2.0, 1.5 and 1.0 TB models) 22 Barracuda LP Series SATA Product Manual, Rev. D
22
Barracuda LP Series SATA Product Manual, Rev. D
3.4
Drive mounting
You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the
bottom-mounting holes. See Figure 3 for drive mounting dimensions. Follow these important mounting precau-
tions when mounting the drive:
•
Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling.
•
Use only 6-32 UNC mounting screws.
•
The screws should be inserted no more than 0.150 inch (3.81 mm) into the bottom or side mounting holes.
•
Do not overtighten the mounting screws (maximum torque: 6 inch-lb).
Recommended
case temperature
measurement location
Figure 3. Mounting dimensions (2.0, 1.5 and 1.0 TB models)