Seagate ST32000646SS Constellation ES (.1) SATA Product Manual - Page 35
Drive mounting
View all Seagate ST32000646SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3.4 Drive mounting You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 5 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling. • Use only 6-32 UNC mounting screws. • The screws should be inserted no more than 0.150 in (3.81mm) into the bottom or side mounting holes. • Do not overtighten the mounting screws (maximum torque: 6 in-lb). Weight: (maximum) 2TB models 710g (1.565 lb) 1TB models 640g (1.411 lb) 500GB models 610g (1.345 lb) Note. These dimensions conform to the Small Form Factor Standard documented in SFF-8301 and SFF-8323 found at www.sffcommittee.org in mm Breather Hole in mm Figure 5. Mounting dimensions-top, side and end view Constellation ES Serial ATA Product Manual, Rev. D in mm 29