Seagate ST32122A Product Manual - Page 38
S.M.A.R.T. commands
View all Seagate ST32122A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
30 Medalist 4342, 3232, 2122, 1722 and 1012 Product Manual 3.2.4 S.M.A.R.T. commands Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T.) provides near-term failure prediction for disc drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to only those attributes the drive can monitor. For more information on S.M.A.R.T. commands and implementation, see the Draft ATA-4 Standard. This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to enable the feature. The table below shows the S.M.A.R.T. command codes that this drive uses. Code in Features Register S.M.A.R.T. Command Supported by Medalist 4342, 3232, 2122, 1722 and 1012 D0H S.M.A.R.T. Read Data Yes D1H Vendor-specific Yes D2H S.M.A.R.T. Enable/Disable Attribute Autosave Yes D3H S.M.A.R.T. Save Attribute Values Yes D4H S.M.A.R.T. Execute Off-line Immediate Yes D7H Vendor-specific Yes D8H S.M.A.R.T. Enable Operations Yes D9H S.M.A.R.T. Disable Operations Yes DAH S.M.A.R.T. Return Status Yes Note. If an appropriate code is not written to the Features Register, the command will be aborted and 0x04 (abort) will be written to the Error register.