Seagate ST3320311CS Pipeline HD Series SATA Product Manual - Page 35
Pipeline HD SATA Product Manual, Rev. D, Serial ATA Interface, See Word 108-111
View all Seagate ST3320311CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
www.seagate.com Serial ATA Interface Table 8 Identify Device commands (Continued) Word Description Value 81 Minor version number 82 Command sets supported 83 Command sets supported 84 Command sets support extension (see note following this table) 0028H 346BH 7D69H 4133H See Word 108-111 note. (4133H = 1000000100101 binary) 85 Command sets enabled 34xxH 86 Command sets enabled BE01H 87 Command sets enable extension 4133H 88 Ultra DMA support and current mode (see note following this 00A4H table) 89 Security erase time 90 Enhanced security erase time 92 Master password revision code 93 Hardware reset value 95-99 ATA-reserved 100-103 Total number of user-addressable LBA sectors available (see Section 2.2 for related information). These words are required for drives that support the 48-bit addressing feature. Maximum value: 0000FFFFFFFFFFFFh. 00A4H 00A9H FFFEH xxxxH 0000H ST2000VM002 = 3,907,029,168 ST1500VM002 = 2,930,277,168 ST1000VM002 = 1,953,525,168 104-107 108-111 ATA-reserved The mandatory value of the world wide name (WWN) for the drive. NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support. 0000H Each drive will have a unique value. 112-127 ATA-reserved 128 Security status 129-159 Seagate-reserved 160-254 ATA-reserved 255 Integrity word 0000H 0001H xxxxH 0000H xxA5H Note Automatic Acoustic Management (AAM) features are not supported. Note See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data. Pipeline HD SATA Product Manual, Rev. D 35