Seagate ST336607LW ST3146807LC Model Product Manual PDF - Page 71
Cheetah 10K.6 SCSI Product Manual, Rev. D, Right-angle to PCBA connectors
UPC - 740617074543
View all Seagate ST336607LW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Cheetah 10K.6 SCSI Product Manual, Rev. D 61 Recommended mating 80-position PCBA mount connectors: Straight-in connector Seagate P/N: 77678703 Amp US P/N: 2-557103-1 or 94-0680-02-1 Amp US P/N: 2-557103-2 or 94-0680-02-2 Amp Japan P/N: 5-175475-9 Hot plug version (with ground guide-pin) 787311-1 with polarization 787311-2 without polarization Right-angle to PCBA connectors Seagate P/N: Amp US P/N: Amp Japan P/N: 77678559 2-557101-1 5-175474-9 For additional information call Amp FAX service at 1-800-522-6752. LW/LWV Model Terminator [7] [6] 2 through X SCSI devices [4] SCSI ID 7 [5] Pin 1 [2] (check your adapter for Pin 1 location) [1] SCSI ID 1 Host Adapter PCB [3] SCSI ID 0 [2] [1] Closed end type 68-pin connector used. Terminators enabled. [2] Open end type (in-line application) connector used. [3] Host need not be on the end of the daisy chain. Another device can be on the end with the terminator, the host having no terminator. [4] Total interface cable length must not exceed that specified in ANSI document T10/1302D (including host adapter/initiator). The cable length restriction limits the total number of devices allowed. [5] SCSI ID7 has highest arbitration priority, then ID15 to ID8 (ID 8 has the very lowest priority). [6] Last drive on the daisy chain. [7] Open-end type 68-pin connector used. If end device, use external terminator and closed-end type 68-pin connector. Figure 24. SCSI daisy chain interface cabling for LW drives