Seagate ST3600057SS Cheetah 15K.6 SAS Product Manual - Page 44
Mechanical specifications
View all Seagate ST3600057SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corrosive chemicals as electronic drive component reliability can be affected by the installation environment. The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulcanized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives. 6.4.8 Electromagnetic susceptibility See Section 2.1.1.1. 6.5 Mechanical specifications Refer to Figure 12 for detailed physical dimensions. See Section 8.3, "Drive mounting." Height: Width: Depth: 1.028 in 4.010 in 5.787 in 26.11 mm 101.85 mm 146.99 mm Weight: ST3450856SS: 1.563 pounds 0.709 kilograms ST3450056SS ST3300656SS: 1.53 pounds 0.694 kilograms ST3300056SS ST3146356SS: 1.487 pounds 0.674 kilograms ST3146756SS 40 Cheetah 15K.6 SAS Product Manual, Rev. B