Seagate ST400FM0073 Seagate 1200 SSD Product Manual - Page 8

S

EAGATE

1200 SSD P

RODUCT

M

ANUAL

, R

EV

. A

2

1.0

S

COPE

This manual describes Seagate Technology

®

LLC, Seagate

®

1200 SSD (Serial Attached SCSI) drives.

Seagate 1200 SSD drives support the SAS Protocol specifications to the extent described in this manual. The

SAS Interface

Manual

(part number 100293071) describes the general SAS characteristics of this and other Seagate SAS drives. The Self-

Encrypting Drive Reference Manual, part number 100515636, describes the interface, general operation, and security

features available on Self-Encrypting Drive models.

Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this

manual may not be predictive of future generation specifications or requirements. If

designing a system which will use one of

the models listed or future generation products and need further assistance, please contact the Field Applications Engineer

(FAE) or our global support services group as shown in See “Seagate Technology Support Services” on page

1

Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.

Note.

Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE) models

before a differentiation between drive-based encryption and other forms of encryption was necessary.

Note.

The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for “Security

of Data at Rest” based on the standards defined by the Trusted Computing Group

(see

www

.trustedcomputingg

roup.org

).

For more information on FIPS 140-2 Level 2 certification see Section 7.0 on page 44.

For product certification status visit -

http://csrc.nist.g

ov/g

roups/STM/cmvp/documents/140-1/1401vend.htm

.

2.5” Models - Limited Warranty with Media Usage

2.5” Models - Managed Life

Standard

Self-Encrypting

SED FIPS 140-2

Standard

Self-Encrypting

SED FIPS 140-2

ST800FM0043

ST800FM0053

ST800FM0063

ST800FM0013

ST800FM0023

ST800FM0033

ST400FM0053

ST400FM0073

ST400FM0013

ST400FM0033

ST200FM0053

ST200FM0073

ST200FM0013

ST200FM0033

1.8” Models -

Limited Warranty with Media Usage

1.8” Models -

Managed Life

Standard

Self-Encrypting

Standard

Self-Encrypting

ST400FM0063

ST400FM0083

ST400FM0023

ST400FM0043

ST200FM0063

ST200FM0083

ST200FM0023

ST200FM0043

High Endurance 2.5” Models -

Limited Warranty with Media Usage

High Endurance 2.5” Models -

Managed Life

Standard

Self-Encrypting

Standard

Self-Encrypting

ST400FM0093

ST400FM0103

ST400FM0113

ST400FM0123

ST200FM0093

ST200FM0103

ST200FM0113

ST200FM0123

ST100FM0093

ST100FM0103

ST100FM0113

ST100FM0123

Section	Page
Seagate® 1200 SSD	1
Seagate Technology Support Services	7
1.0 Scope	8
2.0 Applicable standards and reference documentation	9
2.1 Standards	9
2.1.1 Electromagnetic compatibility	9
2.1.2 Electromagnetic compliance	9
2.1.3 European Union Restriction of Hazardous Substances (RoHS)	10
2.1.4 China Restriction of Hazardous Substances (RoHS) Directive	10
2.2 Reference documents	11
3.0 General description	12
3.1 Standard features	12
3.2 Media description	13
3.3 Performance	13
3.4 Reliability	13
3.5 Formatted capacities	13
3.6 Programmable drive capacity	14
3.7 Factory-installed options	14
3.8 Thin Provisioning	14
3.8.1 Logical Block Provisioning	14
3.8.2 Thin Provisioning capabilities	14
3.8.3 UNMAP	14
3.8.4 FORMAT UNIT command	15
3.8.5 Protection Information (PI) and Security (SED)	15
4.0 Performance characteristics	16
4.1 Internal drive characteristics	16
4.2 Performance characteristics	16
4.2.1 Response time	16
4.2.2 FORMAT UNIT command execution time for 512-byte LBA’s (minutes)	17
4.2.3 Performance	17
4.3 Start/stop time	19
4.4 Cache control	20
4.4.1 Caching write data	20
4.4.2 Prefetch operation	20
5.0 Reliability specifications	21
5.1 Error rates	22
5.1.1 Unrecoverable Errors	22
5.1.2 Interface errors	22
5.2 Endurance Management	22
5.2.1 Wear Leveling	22
5.2.2 Garbage Collection	22
5.2.3 Write Amplification	22
5.2.4 UNMAP	22
5.2.5 Data Retention	23
5.2.6 Lifetime Endurance Management (Available on select models)	23
5.2.7 SSD Percentage Used Endurance Indicator	23
5.3 Reliability and service	23
5.3.1 Annualized Failure Rate (AFR) and Mean Time Between Failure (MTBF)	23
5.3.2 Preventive maintenance	23
5.3.3 Hot plugging the drive	23
5.3.4 S.M.A.R.T.	24
5.3.5 Thermal monitor	25
5.3.6 Drive Self Test (DST)	25
5.3.7 Product warranty	27
6.0 Physical/electrical specifications	28
6.1 Power specifications	28
6.1.1 Power consumption	28
6.2 AC power requirements	28
6.3 DC power requirements	29
6.3.1 Conducted noise immunity	37
6.3.2 Power sequencing	37
6.3.3 Current profiles	37
6.4 Power dissipation	40
6.5 Environmental limits	44
6.5.1 Temperature	44
6.5.2 Relative humidity	45
6.5.3 Effective altitude (sea level)	45
6.5.4 Shock and vibration	45
6.5.5 Air cleanliness	47
6.5.6 Corrosive environment	47
6.5.7 Electromagnetic susceptibility	47
6.6 Mechanical specifications	48
7.0 About FIPS	50
8.0 About self-encrypting drives	51
8.1 Data encryption	51
8.2 Controlled access	51
8.2.1 Admin SP	51
8.2.2 Locking SP	51
8.2.3 Default password	51
8.3 Random number generator (RNG)	51
8.4 Drive locking	52
8.5 Data bands	52
8.6 Cryptographic erase	52
8.7 Authenticated firmware download	52
8.8 Power requirements	53
8.9 Supported commands	53
8.10 Sanitize - Cryptographic Erase	53
8.11 RevertSP	53
8.12 Sanitize Feature Set on SED Drives	53
9.0 Defect and error management	54
9.1 Drive internal defects/errors	54
9.2 Drive error recovery procedures	54
9.3 SAS system errors	54
9.4 Auto-Reallocation	55
9.5 Protection Information (PI)	55
9.5.1 Levels of PI	55
9.5.2 Setting and determining the current Type Level	55
9.5.3 Identifying a Protection Information drive	55
10.0 Installation	56
10.1 Drive orientation	56
10.2 Cooling	56
10.3 Drive mounting	57
10.4 Grounding	57
11.0 Interface requirements	58
11.1 SAS features	58
11.1.1 Task management functions	58
11.1.2 Task management responses	58
11.2 Dual port support	58
11.3 SCSI commands supported	59
11.3.1 INQUIRY data	63
11.3.2 MODE SENSE data	64
11.4 Miscellaneous operating features and conditions	69
11.4.1 SAS physical interface	69
11.4.2 Physical characteristics	74
11.4.3 Connector requirements	74
11.4.4 Electrical description	74
11.4.5 Pin descriptions	74
11.4.6 SAS transmitters and receivers	75
11.4.7 Power	76
11.5 Signal characteristics	76
11.5.1 Ready LED Out	76
11.5.2 Differential signals	77
11.6 SAS-3 Specification compliance	77
11.7 Additional information	77
Numerics	78
A	78
B	78
C	78
D	78
E	78
F	79
G	79
H	79
I	79
J	79
L	79
M	79
N	80
O	80
P	80
Q	80
R	80
S	80
T	81
U	81
V	81
W	81

Seagate ST400FM0073 Seagate 1200 SSD Product Manual - Page 8

Scope

Page 8 highlights