Seagate ST500NM0001 Constellation ES.1 SAS Product Manual - Page 46
Hz @ 0.75 G X, Y, or Z axis
View all Seagate ST500NM0001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Drives packaged in single or multipacks with a gross weight of 20 pounds (8.95 kg) or less by Seagate for general freight shipment shall withstand a drop test from 48 inches (1,070 mm) against a concrete floor or equivalent. X X Figure 11. Recommended mounting Note. Image is for reference only, may not represent actual drive. 7.5.4.2 Vibration a. Operating-normal The drive as installed for normal operation, shall comply with the complete specified performance while subjected to continuous vibration not exceeding 5 - 22 Hz 22 - 350 Hz 350 - 500 Hz 0.25 Gs, limited displacement 0.5 Gs 0.25 Gs Vibration may be applied in the X, Y, or Z axis. b. Operating-abnormal Equipment as installed for normal operation shall not incur physical damage while subjected to periodic vibration not exceeding: 15 minutes of duration at major resonant frequency Vibration occurring at these levels may degrade operational performance during the abnormal vibration period. Specified operational performance will continue when normal operating vibration levels are resumed. This assumes system recovery routines are available. Operating abnormal translational random flat profile 5-500 Hz @ 0.75 G (X, Y, or Z axis) 38 Constellation ES.1 SAS Product Manual, Rev. E