Seagate ST800FM0053 1200 SSD Data Sheet - Page 2

1200 SSD Specifications SED Models FIPS 140-2 Models Interface Options NAND Flash Type Performance Sustained Data Transfer Rate, Max (MB/s) I/O Data Transfer Rate, Max (MB/s) I/Os per Second per Watt (IOPS/W) Sequential Read/Write Command Rate (MB/s) Peak, 128KB Random Read/Write Command Rate (IOPS) Peak, 4KB Configuration/Reliability Nonrecoverable Read Errors per Bits Read, Max Annualized Failure Rate (AFR) Total Terabytes Written (TBW) Over Warranty Period4 Limited Usage-Based Warranty (years)5 Power Management +5/+12V Max Start Current (A) Average Sleep Power (W) Average Idle Power (W) Average Operating Power (W) Environmental Internal Operating Temperature (°C) Nonoperating Temperature (°C) Temperature Change Rate/Hr, Max (°C) Relative Humidity, Noncondensing (%) Shock, 0.5ms (Gs) Vibration, 20Hz to 2000Hz (Grms) Physical Height (mm/in)6 Width (mm/in)6 Depth (mm/in)6 Weight (g/lb) Carton Unit Quantity Cartons per Pallet Cartons per Layer 800GB1 ST800FM00532 ST800FM00632,3 12Gb/s SAS MLC 750 1200 27,160 750/500 110,000/40,000 1 per 10E16 0.44% 14,600 5 0.7/0.4 2.5 3.0 4.05 0 to 60 −40 to 75 20 5 to 95 1000 11.08 7.0/0.276 70.10/2.76 100.45/3.955 100/0.220 20 45 9 400GB1 ST400FM00732 12Gb/s SAS MLC 750 1200 29,650 750/500 110,000/40,000 1 per 10E16 0.44% 7300 5 0.7/0.4 2.5 2.72 3.71 0 to 60 −40 to 75 20 5 to 95 1000 11.08 7.0/0.276 70.10/2.76 100.45/3.955 100/0.220 20 45 9 1 One gigabyte, or GB, equals one billion bytes when referring to drive capacity. 2 Self-Encrypting Drives (SED) and FIPS 140-2 Validated drives are not available in all models or countries. May require TCG-compliant host or controller support. 3 FIPS 140-2 in review. See FIPS 140-2 Level 2 Certificate at http://csrc.nist.gov/groups/STM/cmvp/validation.html 4 Per the JEDEC JESD218A standard using enterprise workload JESD219A with all LBAs allocated 5 Warranty period is either 5 years or when the device reaches the Total TBW Over Warranty Period, whichever comes first. 6 The drive physical dimensions conform to the Small Form Factor Standard (SFF-8201) found at www.sffcommittee.org. For connector-related dimensions, see SFF-8223. 200GB1 ST200FM00732 12Gb/s SAS MLC 750 1200 27,990 750/400 110,000/25,000 1 per 10E16 0.44% 3650 5 0.7/0.4 2.5 2.89 3.93 0 to 60 −40 to 75 20 5 to 95 1000 11.08 7.0/0.276 70.10/2.76 100.45/3.955 100/0.220 20 45 9 www.seagate.com AMERICAS ASIA /PACIFIC EUROPE, MIDDLE EAST AND AFRICA Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 Seagate Technology SAS 16-18, rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00 © 2013 Seagate Technology LLC. All rights reserved. Printed in USA. Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments. All other trademarks or registered trademarks are the property of their respective owners. When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer's operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications. DS1781.2-1305, May 2013