Home » Seagate Manuals » Hard Drives » Seagate ST9160310AS » Manual Viewer

Seagate ST9160310AS Momentus 5400.5 SATA Product Manual - Page 12

Table 1, Drive specifications

UPC - 890552624591

View all Seagate ST9160310AS manuals

Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Table 1: Drive specifications Drive specification ST9160310AS ST9120310AS ST980310AS ST9320320AS ST9250320AS ST9200321AS ST9160310ASG ST9120310ASG ST980310ASG Track-to-track seek time, read (msec typical) Average seek, read (msec typical) Full-stroke seek, read (msec) Startup current, +5V (max) Seek power (typical) Read/write power (typical) Idle mode, low power (typical) Standby mode Sleep mode Voltage tolerance (including noise) Ambient temperature Temperature gradient (°C per hour max) Relative humidity Relative humidity gradient Wet bulb temperature (°C max) Altitude, operating Altitude, nonoperating (meters below mean sea level, max) Shock, operating (Gs max at 2 msec) Shock, nonoperating (Gs max at 2 msec) Shock, nonoperating (Gs max at 1 msec) Shock, nonoperating (Gs max at 0.5 msec) Vibration, operating Vibration, nonoperating Drive acoustics, sound power (bels) Idle** Performance seek Nonrecoverable read errors Annualized Failure Rate (AFR) Load/Unload (U/UL) cycles 1 14 24 (typical) 1.0 amps 1.54 watts Read: 2.6 watts; Write: 2.85 watts 0.725 watts 0.22 watts (typical)*** 0.22 watts (typical)*** +5V ± 5% 0° to 60°C (operating), -40° to 70°C (nonoperating) 20°C (operating) 35°C (nonoperating) 5% to 95% (operating) 5% to 95% (nonoperating) 30% per hour max 37.7 (operating) 40 (nonoperating) -304.8 m to 3,048 m (-1,000 ft to 10,000+ ft) -304.8 m to 12,192 m (-1000 ft to 40,000+ ft) 350 800 1,000 600 1.0 G (0 to peak, 5-500 Hz) 5.0 Gs (0 to peak, 10-500 Hz) 2.4 (typical) 2.6 (max) 2.6 (typical) 2.7 (max) 1 per 1014 bits read 0.48% 25°C, 50% relative humidity 600,000 software-controlled power on/off cycles 20,000 hard power on/off cycles 32°C, 80% relative humidity 5°C, 80% relative humidity 5°C, 10% relative humidity 55°C, 16% relative humidity 600,000 software-controlled power on/off cycles 20,000 hard power on/off cycles 4 Momentus 5400.5 SATA Product Manual, Rev. B

Section	Page
1.0 Introduction 1	5
1.1 About the Serial ATA interface 2	5
2.0 Drive specifications 3	5
2.1 Specification summary table 3	5
2.2 Formatted capacity 5	5
2.2.1 LBA mode 5	5
2.3 Default logical geometry 5	5
2.4 Physical organization 6	5
2.5 Recording and interface technology 6	5
2.6 Physical characteristics 6	5
2.7 Seek time 7	5
2.8 Start/stop times 7	5
2.9 Power specifications 8	5
2.9.1 Power consumption 8	5
2.9.2 Deferred spinup 9	5
2.9.3 Conducted noise 9	5
2.9.4 Voltage tolerance 9	5
2.9.5 Power-management modes 10	5
2.10 Environmental specifications 10	5
2.10.1 Ambient temperature 10	5
2.10.2 Temperature gradient 11	5
2.10.3 Humidity 11	5
2.10.4 Altitude 11	5
2.10.5 Shock 12	5
2.10.6 Vibration 12	5
2.11 Acoustics 13	5
2.12 Electromagnetic immunity 13	5
2.13 Reliability 14	5
2.13.1 Free Fall Protection feature 14	5
2.14 Agency certification 14	5
2.14.1 Safety certification 14	5
2.14.2 Electromagnetic compatibility 14	5
2.14.3 FCC verification 15	5
2.15 Environmental protection 16	5
2.15.1 European Union Restriction of Hazardous Substances (RoHS) 16	5
2.15.2 China Restriction of Hazardous Substances (RoHS) Directive 16	5
2.16 Corrosive environment 16	5
3.0 Configuring and mounting the drive 17	5
3.1 Handling and static-discharge precautions 17	5
3.2 Configuring the drive 18	5
3.3 Serial ATA cables and connectors 18	5
3.4 Drive mounting 19	5
4.0 Serial ATA (SATA) interface 21	5
4.1 Hot-Plug compatibility 21	5
4.2 Serial ATA device plug connector pin definitions 21	5
4.3 Supported ATA commands 23	5
4.3.1 Identify Device command 26	5
4.3.2 Set Features command 29	5
4.3.3 S.M.A.R.T. commands 31	5
5.0 Seagate Technology support services 33	5
Figure 1. Typical +5V only startup and operation current profile 9	7
Figure 2. Serial ATA connectors 18	7
Figure 3. Attaching SATA cabling 18	7
Figure 4. Mounting dimensions-top, side and end view 19	7
1.0 Introduction	9
1.1 About the Serial ATA interface	10
2.0 Drive specifications	11
2.1 Specification summary table	11
2.2 Formatted capacity	13
2.2.1 LBA mode	13
2.3 Default logical geometry	13
2.4 Physical organization	14
2.5 Recording and interface technology	14
2.6 Physical characteristics	14
2.7 Seek time	15
2.8 Start/stop times	15
2.9 Power specifications	16
2.9.1 Power consumption	16
2.9.1.1 Typical current profile	17
2.9.2 Deferred spinup	17
2.9.3 Conducted noise	17
2.9.4 Voltage tolerance	17
2.9.5 Power-management modes	18
2.10 Environmental specifications	18
2.10.1 Ambient temperature	18
2.10.2 Temperature gradient	19
2.10.3 Humidity	19
2.10.3.1 Relative humidity	19
2.10.3.2 Wet bulb temperature	19
2.10.4 Altitude	19
2.10.5 Shock	20
2.10.5.1 Operating shock	20
2.10.5.2 Nonoperating shock	20
2.10.6 Vibration	20
2.10.6.1 Operating vibration	20
2.10.6.2 Nonoperating vibration	20
2.11 Acoustics	21
2.12 Electromagnetic immunity	21
2.13 Reliability	22
2.13.1 Free Fall Protection feature	22
2.14 Agency certification	22
2.14.1 Safety certification	22
2.14.2 Electromagnetic compatibility	22
2.14.3 FCC verification	23
2.15 Environmental protection	24
2.15.1 European Union Restriction of Hazardous Substances (RoHS)	24
2.15.2 China Restriction of Hazardous Substances (RoHS) Directive	24
2.16 Corrosive environment	24
3.0 Configuring and mounting the drive	25
3.1 Handling and static-discharge precautions	25
3.2 Configuring the drive	26
3.3 Serial ATA cables and connectors	26
3.4 Drive mounting	27
4.0 Serial ATA (SATA) interface	29
4.1 Hot-Plug compatibility	29
4.2 Serial ATA device plug connector pin definitions	29
4.3 Supported ATA commands	31
4.3.1 Identify Device command	34
4.3.2 Set Features command	37
4.3.3 S.M.A.R.T. commands	39
5.0 Seagate Technology support services	41
A	43
B	43
C	43
D	43
E	43
F	43
G	43
H	44
I	44
K	44
L	44
M	44
N	44
O	44
P	44
Q	44
R	44
S	45
T	45
U	45
V	45

Match case Limit results 1 per page

Momentus 5400.5 SATA Product Manual, Rev. B

Track-to-track seek time, read

(msec typical)

Average seek, read (msec typical)

Full-stroke seek, read (msec)

24 (typical)

Startup current, +5V (max)

1.0 amps

Seek power (typical)

1.54 watts

Read/write power (typical)

Read: 2.6 watts; Write: 2.85 watts

Idle mode, low power (typical)

0.725 watts

Standby mode

0.22 watts (typical)***

Sleep mode

0.22 watts (typical)***

Voltage tolerance (including noise)

+5V ± 5%

Ambient temperature

0° to 60°C (operating), –40° to 70°C (nonoperating)

Temperature gradient

(°C per hour max)

20°C (operating)

35°C (nonoperating)

Relative humidity

5% to 95% (operating)

5% to 95% (nonoperating)

Relative humidity gradient

30% per hour max

Wet bulb temperature

(°C max)

37.7 (operating)

40 (nonoperating)

Altitude, operating

–304.8 m to 3,048 m (–1,000 ft to 10,000

ft)

Altitude, nonoperating

(meters below mean sea level,

max)

–304.8 m to 12,192 m (–1000 ft to 40,000

ft)

Shock, operating

(Gs max at 2 msec)

350

Shock, nonoperating

(Gs max at 2 msec)

800

Shock, nonoperating

(Gs max at 1 msec)

1,000

Shock, nonoperating

(Gs max at 0.5 msec)

600

Vibration, operating

1.0 G (0 to peak, 5–500 Hz)

Vibration, nonoperating

5.0 Gs (0 to peak, 10–500 Hz)

Drive acoustics, sound power

(bels)

Idle**

2.4 (typical)

2.6 (max)

Performance seek

2.6 (typical)

2.7 (max)

Nonrecoverable read errors

1 per 10

bits read

Annualized Failure Rate (AFR)

0.48%

Load/Unload (U/UL) cycles

25°C, 50% relative humidity

32°C, 80% relative humidity

5°C, 80% relative humidity

5°C, 10% relative humidity

55°C, 16% relative humidity

600,000 software-controlled power on/off cycles

20,000 hard power on/off cycles

600,000 software-controlled power on/off cycles

20,000 hard power on/off cycles

Table 1:

Drive specifications

Drive specification

ST9320320AS

ST9250320AS

ST9200321AS

ST9160310AS

ST9160310ASG

ST9120310AS

ST9120310ASG

ST980310AS

ST980310ASG