Seagate ST9160823AS Momentus 7200.2 SATA Product Manual - Page 13
Seek time, Start/stop times - test
UPC - 836367003251
View all Seagate ST9160823AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2.7 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: • Track-to-track seek time is an average of all possible single-track seeks in both directions. • Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead. Table 2: Typical seek times *Typical seek times (msec) Track-to-track Average Full-stroke Average latency Read 1.0 11.0 22.0 4.17 Write 1.5 13.0 24.0 *Measured in performance mode Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications. 2.8 Start/stop times Time to ready Typical Max Power-on to Ready (sec) 4 8 Standby to Ready (sec) 4 8 Spin down 5 8 Momentus 7200.2 SATA Product Manual, Rev. D 7