Seagate ST9250410AS Momentus 7200.4 SATA Product Manual - Page 10

Table 1, Drive specifications - momentus 7200 4 hard drive

Page 10 highlights

Table 1: Drive specifications Drive specification Read power (typical) Write power (typical) Idle mode, low power (typical) Standby mode Sleep mode Voltage tolerance (including noise) Ambient temperature Temperature gradient (°C per hour max) Relative humidity Relative humidity gradient Wet bulb temperature (°C max) Altitude, operating Altitude, nonoperating (meters below mean sea level, max) Shock, operating (Gs max at 2 msec) Shock, nonoperating (Gs max at 2 msec) Shock, nonoperating (Gs max at 1 msec) Shock, nonoperating (Gs max at 0.5 msec) Vibration, operating Vibration, nonoperating Drive acoustics, sound power (bels) Idle** Performance seek Nonrecoverable read errors Annualized Failure Rate (AFR) Load/Unload (U/UL) cycles 25°C, 50% relative humidity 32°C, 80% relative humidity 5°C, 80% relative humidity 5°C, 10% relative humidity 55°C, 16% relative humidity Warranty Supports Hotplug operation per Serial ATA Revision 2.6 specification ST9500420AS ST9320423AS ST9250410AS ST9160412AS ST9120410AS ST9500420ASG ST9320423ASG ST9250410ASG ST9160412ASG ST9120410ASG 2.1 watts 2.2 watts 0.69 watts 0.20 watts (typical)*** 0.20 watts (typical)*** +5V ± 5% 0°C to 60°C (operating) -40°C to 70°C (nonoperating) 20°C (operating), 35°C (nonoperating) 5% to 95% (operating and nonoperating 30% per hour max 37.7 (operating) 40 (nonoperating) -304.8 m to 3,048 m (-1,000 ft to 10,000+ ft) -304.8 m to 12,192 m (-1000 ft to 40,000+ ft) 350 800 1,000 600 1.0 G (0 to peak, 5-500 Hz) 5 Gs (0 to peak, 5-500 Hz) 2.3 (typical) 2.5 (max) 2.6 (typical) 2.7 (max) 1 per 1014 bits read 0.5% 600,000 software-controlled power on/off cycles 50,000 hard power on/off cycles 600,000 software-controlled power on/off cycles 50,000 hard power on/off cycles To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. Yes (requires COMRESET from host after a hotplug event) *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. ***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby modes will not contribute to battery power consumption. 4 Momentus 7200.4 SATA Product Manual, Rev. A

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46

4
Momentus 7200.4 SATA Product Manual, Rev. A
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels
.
***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby
modes will not contribute to battery power consumption.
Read power (typical)
2.1 watts
Write power (typical)
2.2 watts
Idle mode, low power (typical)
0.69 watts
Standby mode
0.20 watts (typical)***
Sleep mode
0.20 watts (typical)***
Voltage tolerance (including noise)
+5V ± 5%
Ambient temperature
0°C to 60°C (operating)
–40°C to 70°C (nonoperating)
Temperature gradient (°C per hour max)
20°C (operating), 35°C (nonoperating)
Relative humidity
5% to 95% (operating and nonoperating
Relative humidity gradient
30% per hour max
Wet bulb temperature (°C max)
37.7 (operating)
40 (nonoperating)
Altitude, operating
–304.8 m to 3,048 m (–1,000 ft to 10,000
+
ft)
Altitude, nonoperating
(meters below mean sea level, max)
–304.8 m to 12,192 m (–1000 ft to 40,000
+
ft)
Shock, operating (Gs max at 2 msec)
350
Shock, nonoperating (Gs max at 2 msec)
800
Shock, nonoperating (Gs max at 1 msec)
1,000
Shock, nonoperating (Gs max at 0.5 msec)
600
Vibration, operating
1.0 G (0 to peak, 5–500 Hz)
Vibration, nonoperating
5 Gs (0 to peak, 5–500 Hz)
Drive acoustics, sound power (bels)
Idle**
2.3 (typical)
2.5 (max)
Performance seek
2.6 (typical)
2.7 (max)
Nonrecoverable read errors
1 per 10
14
bits read
Annualized Failure Rate (AFR)
0.5%
Load/Unload (U/UL) cycles
25°C, 50% relative humidity
32°C, 80% relative humidity
5°C, 80% relative humidity
5°C, 10% relative humidity
55°C, 16% relative humidity
600,000 software-controlled power on/off cycles
50,000 hard power on/off cycles
600,000 software-controlled power on/off cycles
50,000 hard power on/off cycles
Warranty
To determine the warranty for a specific drive, use a web browser to access the follow-
ing web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You will be asked to provide
the drive serial number, model number (or part number) and country of purchase. The
system will display the warranty information for your drive.
Supports Hotplug operation per Serial ATA
Revision 2.6 specification
Yes (requires COMRESET from host after a hotplug event)
Table 1:
Drive specifications
Drive specification
ST9500420AS
ST9500420ASG
ST9320423AS
ST9320423ASG
ST9250410AS
ST9250410ASG
ST9160412AS
ST9160412ASG
ST9120410AS
ST9120410ASG