Seagate ST9250412AS Momentus 7200.4 SATA Product Manual - Page 13

2.7 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: • Track-to-track seek time is an average of all possible single-track seeks in both directions. • Average seek time is a true statistical random average of at least 5000 measurements of seeks between random tracks, less overhead. Table 2: Typical seek times Typical seek times (msec) Track-to-track Average Full-stroke Average latency Read 1.5 11.0 22.0 4.17 Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications. 2.8 Start/stop times Time to ready Power-on to Ready (sec) Standby to Ready (sec) Typical 4.5 3.0 Max @ 25°C 5.0 3.5 Momentus 7200.4 SATA Product Manual, Rev. C 7