Seagate ST9250412AS Momentus 7200.3 SATA Product Manual - Page 27
Drive mounting
View all Seagate ST9250412AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3.4 Drive mounting You can mount the drive using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 4 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling. • Use only M3 UNC mounting screws. • Do not overtighten the mounting screws (maximum torque: 4.0 inch-lb). • Four (4) threads (0.080 inches) minimum screw engagement recommended. Measurements shown in Figure 4 are in inches. 3.95 +/- .010 Breather Hole Do not cover or seal. + Recommended case temperature measurement location Figure 4. Mounting dimensions-top, side and end view Momentus 7200.3 SATA Product Manual, Rev. C 21