Home » Seagate Manuals » Hard Drives » Seagate ST9300553SS » Manual Viewer

Seagate ST9300553SS Savvio 15K.3 SAS Product Manual - Page 70

Activity LED

View all Seagate ST9300553SS manuals

Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

12.4.2 Physical characteristics This section defines physical interface connector. 12.4.3 Connector requirements Contact your preferred connector manufacturer for mating part information. Part numbers for SAS connectors will be provided in a future revision of this publication when production parts are available from major connector manufacturers. The SAS device connector is illustrated in Figures 14 and 15. 12.4.4 Electrical description SAS drives use the device connector for: • DC power • SAS interface • Activity LED This connector is designed to either plug directly into a backpanel or accept cables. 12.4.5 Pin descriptions This section provides a pin-out of the SAS device and a description of the functions provided by the pins. Table 13: SAS pin descriptions Pin Signal name Signal type Pin Signal name Signal type S1 Port A Ground P1* NC (reserved 3.3Volts) S2* +Port A_in Diff. input pair P2* NC (reserved 3.3Volts) S3* -Port A_in P3 NC (reserved 3.3Volts) S4 Port A Ground P4 Ground S5* -Port A_out Diff output pair P5 Ground S6* +Port A_out P6 Ground S7 Port A Ground P7 5 Volts charge S8 Port B Ground P8* 5 Volts S9* +Port B_in Diff. input pair P9* 5 Volts S10* -Port B_in P10 Ground S11 Port A Ground P11* Ready LED Open collector out S12* -Port B_out Diff output pair P12 Ground S13* +Port B_out P13 12 Volts charge S14 Port B Ground P14* 12 Volts P15* 12 Volts * - Short pin to support hot plugging NC - No connection in the drive. 62 Savvio 15K.3 SAS Product Manual, Rev. D

Section	Page
1.0 Seagate Technology support services	9
2.0 Scope	10
3.0 Applicable standards and reference documentation	11
3.1 Standards	11
3.1.1 Electromagnetic compatibility	11
3.1.2 Electromagnetic compliance	12
3.1.3 European Union Restriction of Hazardous Substances (RoHS)	13
3.1.4 China Restriction of Hazardous Substances (RoHS) Directive	13
3.2 Reference documents	14
4.0 General description	15
4.1 Standard features	16
4.2 Media description	16
4.3 Performance	17
4.4 Reliability	17
4.5 Formatted capacities	17
4.6 Programmable drive capacity	18
4.7 Factory installed options	18
5.0 Performance characteristics	19
5.1 Internal drive characteristics	19
5.2 Seek performance characteristics	19
5.2.1 Access time	19
5.2.2 Format command execution time for 512-byte sectors (minutes)	20
5.2.3 General performance characteristics	20
5.3 Start/stop time	20
5.4 Prefetch/multi-segmented cache control	21
5.5 Cache operation	21
5.5.1 Caching write data	22
5.5.2 Prefetch operation	22
6.0 Reliability specifications	23
6.1 Error rates	23
6.1.1 Recoverable Errors	23
6.1.2 Unrecoverable Errors	23
6.1.3 Seek errors	24
6.1.4 Interface errors	24
6.2 Reliability and service	24
6.2.1 Annualized Failure Rate (AFR) and Mean Time Between Failure (MTBF)	24
6.2.2 Preventive maintenance	24
6.2.3 Hot plugging the drive	24
6.2.4 S.M.A.R.T.	25
6.2.5 Thermal monitor	26
6.2.6 Drive Self Test (DST)	27
6.2.7 Product warranty	29
7.0 Physical/electrical specifications	30
7.1 PowerChoiceTM power management	30
7.1.1 PowerChoice reporting methods	31
7.2 AC power requirements	31
7.3 DC power requirements	31
7.3.1 Conducted noise immunity	34
7.3.2 Power sequencing	34
7.3.3 Current profiles	35
7.4 Power dissipation	37
7.5 Environmental limits	39
7.5.1 Temperature	39
7.5.2 Relative humidity	39
7.5.3 Effective altitude (sea level)	40
7.5.4 Shock and vibration	40
7.5.5 Air cleanliness	42
7.5.6 Corrosive environment	42
7.5.7 Acoustics	42
7.5.8 Electromagnetic susceptibility	42
7.6 Mechanical specifications	43
8.0 About FIPS	44
9.0 About self-encrypting drives	46
9.1 Data encryption	46
9.2 Controlled access	46
9.2.1 Admin SP	46
9.2.2 Locking SP	46
9.2.3 Default password	47
9.3 Random number generator (RNG)	47
9.4 Drive locking	47
9.5 Data bands	47
9.6 Cryptographic erase	47
9.7 Authenticated firmware download	47
9.8 Power requirements	48
9.9 Supported commands	48
9.10 Sanitize - CRYPTOGRAPHIC ERASE	48
9.11 RevertSP	48
10.0 Defect and error management	49
10.1 Drive internal defects/errors	49
10.2 Drive error recovery procedures	49
10.3 SAS system errors	50
10.4 Background Media Scan	51
10.5 Media Pre-Scan	51
10.6 Deferred Auto-Reallocation	51
10.7 Idle Read After Write	51
10.8 Protection Information (PI)	52
10.8.1 Levels of PI	52
10.8.2 Setting and determining the current Type Level	52
10.8.3 Identifying a Protection Information drive	53
11.0 Installation	54
11.1 Drive orientation	54
11.2 Cooling	55
11.3 Drive mounting	56
11.4 Grounding	56
12.0 Interface requirements	57
12.1 SAS features	57
12.1.1 Task management functions	57
12.1.2 Task management responses	57
12.2 Dual port support	58
12.3 SCSI commands supported	58
12.3.1 Inquiry data	62
12.3.2 Mode Sense data	62
12.4 Miscellaneous operating features and conditions	66
12.4.1 SAS physical interface	67
12.4.2 Physical characteristics	70
12.4.3 Connector requirements	70
12.4.4 Electrical description	70
12.4.5 Pin descriptions	70
12.4.6 SAS transmitters and receivers	71
12.4.7 Power	71
12.5 Signal characteristics	71
12.5.1 Ready LED Out	71
12.5.2 Differential signals	72
12.6 SAS-2 Specification compliance	72
12.7 Additional information	72
Numerics	73
A	73
B	73
C	73
D	73
E	74
F	74
G	74
H	74
I	74
J	74
K	74
L	74
M	75
N	75
O	75
P	75
Q	75
R	75
S	76
T	76
U	76
V	76
W	77

Match case Limit results 1 per page

Savvio 15K.3 SAS Product Manual, Rev. D

12.4.2

Physical characteristics

This section defines physical interface connector.

12.4.3

Connector requirements

Contact your preferred connector manufacturer for mating part information. Part numbers for SAS connectors

will be provided in a future revision of this publication when production parts are available from major connec-

tor manufacturers.

The SAS device connector is illustrated in Figures 14 and 15.

12.4.4

Electrical description

SAS drives use the device connector for:

•

DC power

•

SAS interface

•

Activity LED

This connector is designed to either plug directly into a backpanel or accept cables.

12.4.5

Pin descriptions

This section provides a pin-out of the SAS device and a description of the functions provided by the pins.

Table 13:

SAS pin descriptions

Signal name

Signal type

Signal name

Signal type

Port A Ground

P1*

NC (reserved 3.3Volts)

S2*

+Port A_in

Diff. input pair

P2*

NC (reserved 3.3Volts)

S3*

-Port A_in

NC (reserved 3.3Volts)

Port A Ground

Ground

S5*

-Port A_out

Diff output pair

Ground

S6*

+Port A_out

Ground

Port A Ground

5 Volts charge

Port B Ground

P8*

5 Volts

S9*

+Port B_in

Diff. input pair

P9*

5 Volts

S10*

-Port B_in

P10

Ground

S11

Port A Ground

P11*

Ready LED

Open collector out

S12*

-Port B_out

Diff output pair

P12

Ground

S13*

+Port B_out

P13

12 Volts charge

S14

Port B Ground

P14*

12 Volts

P15*

12 Volts

* - Short pin to support hot plugging

NC - No connection in the drive.