Seagate ST9320325AS Momentus 5400.6 SATA Product Manual - Page 14

Formatted capacity

Page 14 highlights

Table 3: Drive specifications for 120 and 80 GB models Drive specification Shock, operating (Gs max at 2 msec) Shock, nonoperating (Gs max at 2 msec) Shock, nonoperating (Gs max at 1 msec) Shock, nonoperating (Gs max at 0.5 msec) Vibration, operating Vibration, nonoperating Drive acoustics, sound power (bels) Idle** Performance seek Nonrecoverable read errors Annualized Failure Rate (AFR) Load/Unload (U/UL) cycles ST9120315AS ST9120315ASG 350 800 1,000 600 1.0 G (0 to peak, 5-500 Hz) 5.0 Gs (0 to peak, 5-500 Hz) 2.4 (typical) 2.6 (max) 2.5 (typical) 2.6 (max) 1 per 1014 bits read 0.48% ST980313AS ST980313ASG 25°C, 50% relative humidity 600,000 software-controlled power on/off cycles 20,000 hard power on/off cycles 32°C, 80% relative humidity 5°C, 80% relative humidity 5°C, 10% relative humidity 55°C, 16% relative humidity Warranty 600,000 software-controlled power on/off cycles 20,000 hard power on/off cycles To determine the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp Supports Hotplug operation per Serial ATA Revision 2.6 specification You will be asked to provide the drive serial number, model number (or part number) and country of purchase. After submitting this information, the system will display the warranty information for your drive. Yes (requires COMRESET from host after a hotplug event) *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. ***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby modes will not contribute to battery power consumption. 2.2 Formatted capacity Model ST9500325AS and ST9500325ASG ST9400326AS ST9320325AS and ST9320325ASG ST9250315AS and ST9250315ASG ST9160314AS, ST9160301AS and ST9160314ASG ST9120315AS and ST9120315ASG ST980313AS and ST980313ASG Formatted capacity* 500 Gbytes 400 Gbytes 320 Gbytes 250 Gbytes 160 Gbytes 120 Gbytes 80 Gbytes Guaranteed sectors 976,773,168 781,422,768 625,142,448 488,397,168 312,581,808 234,441,648 156,301,488 Bytes per sector 512 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 8 Momentus 5400.6 SATA Product Manual, Rev. E

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

8
Momentus 5400.6 SATA Product Manual, Rev. E
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels
.
***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby
modes will not contribute to battery power consumption.
2.2
Formatted capacity
Model
Formatted
capacity*
Guaranteed
sectors
Bytes per
sector
ST9500325AS and ST9500325ASG
500 Gbytes
976,773,168
512
ST9400326AS
400 Gbytes
781,422,768
ST9320325AS and ST9320325ASG
320 Gbytes
625,142,448
ST9250315AS and ST9250315ASG
250 Gbytes
488,397,168
ST9160314AS, ST9160301AS and ST9160314ASG
160 Gbytes
312,581,808
ST9120315AS and ST9120315ASG
120 Gbytes
234,441,648
ST980313AS and ST980313ASG
80 Gbytes
156,301,488
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
Shock, operating (Gs max at 2 msec)
350
Shock, nonoperating (Gs max at 2 msec)
800
Shock, nonoperating (Gs max at 1 msec)
1,000
Shock, nonoperating (Gs max at 0.5 msec)
600
Vibration, operating
1.0 G (0 to peak, 5–500 Hz)
Vibration, nonoperating
5.0 Gs (0 to peak, 5–500 Hz)
Drive acoustics,
sound power (bels)
Idle**
2.4 (typical)
2.6 (max)
Performance seek
2.5 (typical)
2.6 (max)
Nonrecoverable read errors
1 per 10
14
bits read
Annualized Failure Rate (AFR)
0.48%
Load/Unload (U/UL) cycles
25°C, 50% relative humidity
32°C, 80% relative humidity
5°C, 80% relative humidity
5°C, 10% relative humidity
55°C, 16% relative humidity
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
Warranty
To determine the warranty for a specific drive, use a web browser to access the following
web page: support.seagate.com/customer/warranty_validation.jsp
You will be asked to provide the drive serial number, model number (or part number) and
country of purchase. After submitting this information, the system will display the war-
ranty information for your drive.
Supports Hotplug operation per Serial ATA
Revision 2.6 specification
Yes (requires COMRESET from host after a hotplug event)
Table 3:
Drive specifications for 120 and 80 GB models
Drive specification
ST9120315AS
ST9120315ASG
ST980313AS
ST980313ASG