Seagate ST960813AS Momentus 5400.3 SATA Product Manual - Page 11

Formatted capacity, Default logical geometry

Page 11 highlights

Table 1: Drive specifications Drive specification Warranty Supports Hotplug operation per Serial ATA Revision 2.5 specification ST9160821AS ST9120822AS ST9100828AS ST980811AS ST960813AS ST940814AS 5 years on distribution units. To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. Yes (requires COMPRESET from host after a hotplug event) *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. ***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby modes will not contribute to battery power consumption. 2.2 Formatted capacity Model ST9160821AS ST9120822AS ST9100828AS ST980811AS ST960813AS ST940814AS Formatted capacity* 160 Gbytes 120 Gbytes 100 Gbytes 80 Gbytes 60 Gbytes 40 Gbytes Guaranteed sectors 312,581,808 234,441,648 195,371,568 156,301,488 117,210,240 78,140,160 Bytes per sector 512 512 512 512 512 512 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48bit addressing support of drives with capacities over 137 Gbytes. 2.3 Default logical geometry Cylinders 16,383 Read/write heads 16 Sectors per track 63 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. Momentus 5400.3 SATA Product Manual, Rev. D 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

Momentus 5400.3 SATA Product Manual, Rev. D
5
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels
.
***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby
modes will not contribute to battery power consumption.
2.2
Formatted capacity
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
2.2.1
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to
n–1,
where
n
is
the number of guaranteed sectors as defined above
.
See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-
bit addressing support of drives with capacities over 137 Gbytes.
2.3
Default logical geometry
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to
n–1,
where
n
is
the number of guaranteed sectors as defined above
.
Warranty
5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to access the following web
page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive
serial number, model number (or part number) and country of purchase. The system will display
the warranty information for your drive.
Supports Hotplug operation per
Serial ATA Revision 2.5 specifica-
tion
Yes (requires COMPRESET from host after a hotplug event)
Model
Formatted capacity*
Guaranteed sectors
Bytes per sector
ST9160821AS
160 Gbytes
312,581,808
512
ST9120822AS
120 Gbytes
234,441,648
512
ST9100828AS
100 Gbytes
195,371,568
512
ST980811AS
80 Gbytes
156,301,488
512
ST960813AS
60 Gbytes
117,210,240
512
ST940814AS
40 Gbytes
78,140,160
512
Cylinders
Read/write heads
Sectors per track
16,383
16
63
Table 1:
Drive specifications
Drive specification
ST9160821AS
ST9120822AS
ST9100828AS
ST980811AS
ST960813AS
ST940814AS