Seagate STM305004N1AAAS-RK DiamondMax 21 SATA Product Manual - Page 31
Acoustics, Electromagnetic immunity - motors
![]() |
UPC - 751921028924
View all Seagate STM305004N1AAAS-RK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2.10 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward. Note. For seek mode tests, the drive is placed in seek mode only. The number of seeks per second is defined by the following equation: (Number of seeks per second = 0.4 / (average latency + average access time) Table 8: Fluid Dynamic Bearing (FDB) motor acoustics STM3500630AS STM3320620AS, STM3320820AS, and STM3250820AS STM3250824AS STM3250310AS STM3160815AS, STM3160215AS, STM380815AS STM380215AS and STM340215AS Idle* 2.8 bels (typ) 3.0 bels (max) 2.5 bels (typ) 2.9 bels (max) 2.7 bels (typ) 2.9 bels (max) 2.6 bels (typ) 2.7 bels (max) 2.8 bels (typ) 3.0 bels (max) Seek 3.7 bels (typ)** 3.9 bels (max)** 3.0 bels (typ)** 3.2 bels (max)** 3.4 bels (typ)** 3.6 bels (max)** 2.7 bels (typ)*** 2.8 bels (max)*** 3.0 bels (typ)*** 3.2 bels (max)*** *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. **Measured in performance mode. ***Measured in quiet mode. 2.11 Electromagnetic immunity When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table: Table 9: Radio frequency environments Test Electrostatic discharge Radiated RF immunity Electrical fast transient Surge immunity Conducted RF immunity Voltage dips, interrupts Description Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV Performance level B 80 to 1,000 MHz, 3 V/m, A 80% AM with 1 kHz sine 900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz ± 1 kV on AC mains, ± 0.5 kV on external I/O B ± 1 kV differential, ± 2 kV common, AC mains B 150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz sine A 0% open, 5 seconds C 0% short, 5 seconds C 40%, 0.10 seconds C 70%, 0.01 seconds B Reference standard EN 61000-4-2: 95 EN 61000-4-3: 96 ENV 50204: 95 EN 61000-4-4: 95 EN 61000-4-5: 95 EN 61000-4-6: 97 EN 61000-4-11: 94 DiamondMax 21 Serial ATA Product Manual, Rev. C 25
![](/manual_guide/products/seagate-stm3320820as-diamondmax-21-sata-product-manual-2216d69/31.png)