Seagate STM3320820A DiamondMax 21 PATA Product Manual - Page 46

Identify Device command 32 Idle 30 Idle and Standby timers 15 Idle Immediate 30 Idle mode 15 Idle mode power 13 IEC950 20 Information Technology Equipment 20 Initialize Device Parameters 30 interface 11, 29 interface signals 29 interference 21 internal data-transfer rate OD 11 ISO document 7779 18 J jumper settings 25 K Korean RRL 21 L LBA mode 10 length 11 logical geometry 10 M maintenance 20 master 25 master/slave 1 Master/slave configuration 25 maximum temperature 16 Mean Time Between Failures 20 measurement locations 16 modes 29 monitoring 1 mounting the drive 23, 26 MTBF 20 N noise 14 nominal power 3 nonoperating shock 17 nonoperating vibration 17 Nonrecoverable read errors 20 O operating power and current 13 operating shock 17 operating vibration 17 orientation 26 40 P physical characteristics 11 pins 29 PIO 29 power consumption 13 power dissipation 13 power management 15 power specifications 13 power-management modes 15 Power-on to Ready 12 power-on-hours 20 precautions 26 programmable power management 15 R radiated RF immunity 19 radio and television interference 21 radio frequency 19 random track location 13 Read Buffer 30 Read DMA 30 Read DMA Extended 30 Read DMA without Retries 30 read errors 20 Read Log Ext 30 Read Multiple 1, 30 Read Multiple Extended 30 Read Native Max Address 30 Read Native Max Address Extended 30 Read Sectors 30 Read Sectors Extended 30 Read Sectors Without Retries 30 Read Verify Sectors 30 Read Verify Sectors Extended 30 Read Verify Sectors Without Retries 30 read/write power and current 13 Recalibrate 30 recording and interface technology 11 recording density 11 recording heads 1 recording method 11 register 35 relative humidity 16 reliability 20 resistance 14 resistive load 14 RF 19 RoHS 22 S S.M.A.R.T. commands 36 S.M.A.R.T. Disable Operations 31 S.M.A.R.T. drive monitoring 1 S.M.A.R.T. Enable/Disable Autosave 31 DiamondMax 21 PATA Product Manual, Rev. B