Seagate Video 3.5 HDD Video 3.5 HDD Product Manual (formerly Pipeline HD) - Page 33
Identify Device command, Description, Value, Command name, Command code in hex
View all Seagate Video 3.5 HDD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
www.seagate.com Serial ATA Interface Table 7 Supported ATA commands (continued) Command name Command code (in hex) Write Multiple C5H Write Multiple Extended 39H Write Multiple FUA Extended CEH Write Sectors 30H Write Sectors Without Retries 31H Write Sectors Extended 34H Write Stream DMA Extended 3AH Write Stream Extended 3BH Write Uncorrectable 45H 4.3.1 Identify Device command The Identify Device command (command code ECH) transfers information about the drive to the host following power up. The data is organized as a single 4096-byte block of data, whose contents are shown on page 30. All reserved bits or words should be set to zero. Parameters listed with an "x" are drive-specific or vary with the state of the drive. The following commands contain drive-specific features that may not be included in the Serial ATA specification. Table 8 Identify Device commands Word 0 1 2 3 4 5 6 7-9 10-19 20 21 22 23-26 27-46 Description Configuration information: • Bit 15: 0 = ATA; 1 = ATAPI • Bit 7: removable media • Bit 6: removable controller • Bit 0: reserved Number of logical cylinders ATA-reserved Number of logical heads Retired Retired Number of logical sectors per logical track: 63 Retired Serial number: (20 ASCII characters, 0000H = none) Retired Retired Obsolete Firmware revision (8 ASCII character string, padded with blanks to end of string) Drive model number: (40 ASCII characters, padded with blanks to end of string) Value 0C5AH 16,383 C837H 16 0000H 0000H 003FH 0000H ASCII 0000H 0000H 0000H x.xx Video 3.5 HDD Product Manual, Rev. H 33