Sealey CTI120 Instruction Manual - Page 2

fig.3, fig.2, fig.1

Get Sealey CTI120 PDF manuals and user guides View all Sealey CTI120 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

2. INTRODUCTION Compact digital tyre inflator with output of 12L/min. Pressure gauge reads up to 120psi (kPa, kg/cm² and bar equivalents). 140mm Extension tube with Schrader connection. Micro USB rechargeable (cable supplied). USB output for charging mobile phone etc. (5V/2A). Supplied with sports ball pin adaptor, balloon/inflatables adaptor and also a Presta valve adaptor for road bicycle tyres. Built-in 1W SMD LED for ease of use at night. Preset the desired psi to begin operation and unit will cut-out automatically once that pressure is reached. Auto cut-out if hose kinks, to avoid damage to pump. Micro USB cable not shown 1.Outlet Grid 5.Unit Button 9. Inlet grid 13. USB output port 2. Pressure gauge 6.Start/Stop button 10.LED Lighting 14.Micro USB input port 3. Reduce button 7.LED Lighting button 11.Hose Connector 15. Air hose 3. SPECIFICATION Hose Length 140mm Typical Inflation Time 0-30psi in 619sec (175/70/R13) Maximum Pressure 120psi Airflow 0.42cfm/12ltr/min USB Output 5V/2A Battery 2000mAh/22.2Wh 4. OPERATION 4.1. 4.1.1. 4.2. 4.2.1. 4.2.2. CHARGING Please charge the battery fully before use (fig.2). Especially for the first time or after it is unused for a long time. Charge for about 4 hours for full charge. Other functions of the product are not available during charging. USING THE USB CHARGING PORT USB output of CTI120 is plug and play. The air pump will not work, when you are charging a device from the tyre inflator. The USB output will turn off automatically. fig.2 fig.1 4.Increase Button 8.Indicator 12.Outlet Grid 16. 4×Valve adapters © Jack Sealey Limited Original Language Version fig.3 CTI120 Issue 3 (2) 04/08/20

  • 1
  • 2
  • 3
2. INTRODUCTION
C
ompact digital tyre inflator with output of 12L/min. Pressure gauge reads up to 120psi (kPa, kg/cm² and bar equivalents). 140mm Extension
tube with Schrader connection. Micro USB rechargeable (cable supplied). USB output for charging mobile phone etc. (5V/2A). Supplied with
sports ball pin adaptor, balloon/inflatables adaptor and also a Presta valve adaptor for road bicycle tyres. Built-in 1W SMD LED for ease of
use at night. Preset the desired psi to begin operation and unit will cut-out automatically once that pressure is reached. Auto cut-out if hose
kinks, to avoid damage to pump.
1.Outlet Grid
2. Pressure gauge
3. Reduce button
4.Increase Button
5.Unit Button
6.Start/Stop button
7.LED Lighting button
8.Indicator
9. Inlet grid
10.LED Lighting
11.Hose Connector
12.Outlet Grid
13. USB output port
14.Micro USB input port
15. Air hose
16. 4×Valve adapters
3. SPECIFICATION
Hose Length:
..............................................................
140mm
T
ypical Inflation Time:
..........
0-30psi in 619sec (175/70/R13)
M
aximum Pressure:
....................................................
120psi
A
irflow:
........................................................
0.42cfm/12ltr/min
USB Output:
.................................................................
5V/2A
Battery:
......................................................
2000mAh/22.2Wh
4. OPERATION
4.1.
CHARGING
4.1.1.
Please charge the battery fully before use (fig.2). Especially
for the first time or after it is unused for a long time. Charge
for about 4 hours for full charge. Other functions of the product
are not available during charging.
4.2.
USING THE USB CHARGING PORT
4.2.1.
USB output of
CTI120 is plug and play.
4.2.2.
The air pump will not work, when you are
charging a device from the tyre inflator.
The USB output will turn off automatically.
fig.3
Original Language Version
© Jack Sealey Limited
C
TI120 Issue 3 (2)
04/08/20
fig.2
fig.1
Micro USB cable
not shown