Seiko 7B24 Manual - Page 15

■ Automatic reception and manual reception This watch sets the time and date by automatically receiving a radio signal at a fixed time. The antenna for receiving radio signals inside the watch is at the 9 o'clock position. Turning the antenna toward the outside of the window enables the watch to receive radio signals more easily. ・ Automatic reception This watch automatically receives a radio signal at 2:00 AM. ※ If the watch fails to receive receives a radio signal at 2:00 AM, it will attempt to receive a radio signal at 3:00 AM. If it fails again, it will attempt to receive a radio signal at 4:00 AM. When receiving radio signals, place the watch in a place where it can easily receive a radio signal. How to Set the Time and Date (Radio Signal Reception) ・ Manual reception W hen this watch cannot automatically receive a radio signal due to a difficult receiving environment, it is possible to receive them arbitrarily at any time. How to conduct manual reception → pages 136-137 ※ W hen setting a time zone for regions other than radio signal reception range, the radio signal reception function will not work. C heck the setting of the time zone → How to set the time zone (Selecting transmitting station) on pages 106-107 ※ Radio signal reception results depend on a receiving condition. → Environments in which it is difficult to receive a radio signal on page 100 ※ This watch is unable to receive radio signals outside a reception range → Radio signal reception range indication on pages 96-98 ※ When the watch is not displaying the precise time and date even after successfully receiving a radio signal → At Trouble: Misalignment of the time and hands on page 152, Misalignment of the date on page 154. 95