Seiko 7K52 Manual - Page 29

Necessary procedure after battery change

Page 29 highlights

English Necessary procedure after battery change ● When the battery is replaced with a new one or when the watch hands move improperly, follow the procedure below. The IC is reset and then the watch operates normally. * The log data stored in memory will be erased by following the procedure below. Pull out Crown to the second click and press buttons B B and C at the same time. C ➠ Before using the watch: ● Set the time and date. ● Press button B to recall the log data. The following data will be displayed. Diving time Maximum depth Average depth Time submerged DATA 1 15 minutes 20 m DATA 2 30 minutes 40 m 10.0 m 20.0 m Time randomly selected Time of DATA 1 plus 6 hours * If the above data are not properly indicated, the watch may be out of order. Contact the retailer from whom the watch was purchased or an AUTHORIZED SEIKO DEALER. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

English
29
Necessary procedure after battery change
When the battery is replaced with a new one or when the watch hands move improperly, follow the
procedure below.
The IC is reset and then the watch operates normally.
* The log data stored in memory will be erased by following the procedure below.
Pull out
Crown
to the second click and press
buttons
B and C
at the same time.
Before using the watch:
Set the time and date.
Press
button B
to recall the log data.
The following data will be displayed.
C
B
Maximum depth
Diving time
Average depth
Time submerged
DATA 1
20 m
15 minutes
10.0 m
Time randomly selected
DATA 2
30 minutes
Time of DATA 1 plus 6 hours
40 m
20.0 m
*
If the above data are not properly indicated, the watch may be out of order.
Contact the retailer from whom
the watch was purchased or an AUTHORIZED SEIKO DEALER.