Seiko 7T92 Manual - Page 6

Stopwatch Hand Position Adjustment

Page 6 highlights

English 1. When the stopwatch is or has been measuring or is stopped, if the crown is pulled out to the second click, it will automatically reset the STOPWATCH hands to "0". 2. If is recommended that the hands be set to the time a few minutes ahead of the current time, taking into consideration the time required to adjust the STOPWATCH hand position if necessary. 3. When setting the hour hand, be sure to check that AM/PM is correctly set. The watch is so designed that the date changes once in 24 hours. 4. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute. 2. STOPWATCH HAND POSITION ADJUSTMENT ✩ If the STOPWATCH hands are not in the "0" position, follow the procedure below to set them to the "0" position. STOPWATCH 1/20-second hand A STOPWATCH second hand 6 STOPWATCH hour hand 6 B STOPWATCH minute hand

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

6
English
1.
When the stopwatch is or has been measuring or is stopped, if the crown is pulled out to the second
click, it will automatically reset the STOPWATCH hands to “0”.
2.
If is recommended that the hands be set to the time a few minutes ahead of the current time, taking
into consideration the time required to adjust the STOPWATCH hand position if necessary.
3.
When setting the hour hand, be sure to check that AM/PM is correctly set.
The watch is so designed
that the date changes once in 24 hours.
4.
When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn
it back to the exact minute.
2.
STOPWATCH HAND POSITION ADJUSTMENT
If the STOPWATCH hands are not in the “0” position, follow the procedure below to set them
to the “0” position.
B
STOPWATCH second hand
STOPWATCH hour hand
6
STOPWATCH 1/20-second hand
A
STOPWATCH minute hand