Seiko 8R28 Manual - Page 4

● Check the type of the crown of your watch English Turn the crown clockwise. The crown turns. The crown does not turn. The crown of your watch is the screw lock type.* To set the watch Unscrew the crown by turning it counterclockwise. Unscrew. Go to "HOW TO USE" Screw up. * If your watch has a screw-lock crown, the crown will screw into the watch case for added protection. • After completing all settings of the watch, screw the crown in again by turning it clockwise while pressing it. • If the crown is too stiff to be screwed in, turn the crown counterclockwise once and then give another try. • Do not screw it in by force as it may damage the slots of the crown.  HOW TO USE This watch is an automatic watch equipped with a manual winding mechanism. • When the watch is worn on the wrist, the motion of the wearer's arm winds the mainspring of the watch. • If your watch is completely stopped, it is recommended that you manually wind the mainspring by turning the crown. ● How to manually wind the mainspring by turning the crown 1. Slowly turn the crown clockwise (in the 12 o'clock direction) to wind the mainspring. * Turning the crown counterclockwise (the 6 o'clock direction) does not wind the mainspring. 2. Continue to turn the crown until the mainspring is sufficiently wound. The small second hand will start moving. 3. Set the time and date before putting the watch on your wrist.  English