Seiko DH33 Manual - Page 5

English ➡ ➡ HOW TO USE TIME FUNCTIONS ■ TIME/CALENDAR FUNCTION TIME/CALENDAR SETTING ● The time/calendar setting cannot be made for 10 minutes after a dive. Press to show TIME/CALENDAR display. Current time Regular alarm time ▼ • Regular alarm time is displayed only when it is set. Press to show TIME/CALENDAR SETTING display. ▼ ▼ Press to set the flashing digits. * The digits move quickly by keeping the button pressed. * When both the hour and minute digits are flashing, changeover between 12- and 24-hour indications can be made. * For the 12-hour indication, "AM" or "PM" is shown. There is no mark for the 24-hour indication. < Seconds setting > When the seconds digits are flashing, press button D in accordance with a time signal. The digits are reset to "00" and start immediately. * When the digits count any number from 30 to 59, one minute is added and the seconds start immediately. ▼ Press to return to TIME/CALENDAR display. * If the watch is left untouched in the TIME/CALENDAR SETTING display, the display will automatically return to the TIME/ ▼ CALENDAR in 1 to 2 minutes. ▼ Press to select the digits to be adjusted (flashing). * With each press, the digits flash in the following order: Seconds ➡ Minutes ➡ Hour ➡ Year ➡ ➡ ➡ 12-/24-hour indication 8 ▼ Date Month When all the segments of the display light up: ● If buttons C and D are pressed at the same time in the TIME/CALENDAR SETTING display, all the segments of the display will light up. This is not a malfunction. Press button A, B, C or D to return to the TIME/CALENDAR display, and set the time/calendar again. English HOW TO USE TIME FUNCTIONS n REGULAR ALARM FUNCTION ● The alarm can be set to ring once a day at a designated time. ● Once the alarm is set, the set time is shown in the TIME/CALENDAR display. ● Alarm can be tested. ● Hourly time signal is provided. REGULAR ALARM SETTING Press to show REGULAR ALARM display. ▼ Press to show REGULAR ALARM SETTING display. 2. When the digits are adjusted in the REGULAR ALARM SETTING display, the alarm is engaged automatically, and the regular alarm mark is shown on the display. 3. When setting the hour digits in the 12-hour indication, check that AM/PM is correctly set. "A" or "P" is shown for the AM or PM setting, respectively. ▼ ▼ With each press, flashing digits change in the following order: Hour ➡ Minutes ▼ Press to set the flashing digits. * The digits move quickly by keeping the button pressed. ▼ Press to return to REGULAR ALARM display. Notes: 1. If the watch is left untouched in the REGULAR ALARM SETTING display, the display will automatically return to the TIME/ CALENDAR in 1 to 2 minutes. ENGAGEMENT/DISENGAGEMENT OF REGULAR ALARM AND HOURLY TIME SIGNAL With each press in the REGULAR ALARM display, the regular alarm and hourly time signal are engaged and disengaged in the following order: ➡ Both engaged ➡➡➡ Neither engaged Alarm engaged Hourly time signal engaged 9