Seiko SFJ001 Owner Manual - Page 13
How to use an easy adjust type clasp
View all Seiko SFJ001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
TO PRESERVE THE QUALITY OF YOUR WATCH TO PRESERVE THE QUALITY OF YOUR WATCH 3 Pull the pin out of an adjustment hole of the band. Slide the band to adjust its length and find an appropriate hole. Place the pin into the hole. Pin Adjustment hole 4 Fasten the flap. 5 Adjustment hole Pin EN 44 ● How to wear the band (Opening and closing the clasp) 1. Lightly press the push buttons to open the clasp. * Note that pressing the push buttons too firmly (deeply) actuates the adjuster, which lengthens the band. Push button Buckle 5 2. Fasten the clasp by pressing the frame of the buckle. EN 46 How to use an easy adjust type clasp Some bands are provided with an easy adjust type clasp for fine adjustment of the band's length. If the clasp of the watch you purchased is as follows, please refer to the following instructions. * The band can be lengthened by up to about 5 mm. This is useful if the band feels too tight or is uncomfortable for some reason. 5 EN 45 ● How to adjust the length of the band 1. You can lengthen the band by up to about 5 mm (2 stages) by firmly pressing the push buttons from both sides to actuate the adjuster. 2. Fasten the clasp by pressing the frame of the buckle. * Even while the clasp is closed, you can still retract the length of band extended by the adjuster. 5 * The above illustrations are provided as examples. Some details may differ depending on the model. EN 47 TO PRESERVE THE QUALITY OF YOUR WATCH TO PRESERVE THE QUALITY OF YOUR WATCH