Seiko SPL062 Owner Manual - Page 12

l HOW TO CANCEL THE ALARM TIME YOU HAVE SET English CROWN Pull out to first click. t B Press and hold until the ALARM hands stop and indicate the current time. t B CROWN Push back in to normal position. * To correct the alarm time you have set, follow the procedure described in "ALARM TIME SETTING". l SOUND DEMONSTRATION FUNCTION A CROWN Pull out to first click. t A Press and hold for more than 2 seconds. * The alarm sound can be heard t while the button is kept pressed. CROWN Push back in to normal 22 position. BATTERY CHANGE The miniature battery which powers your watch should last approximately 3 years. However, because the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period. When the battery expires, be sure to replace it as soon as possible to prevent any mal­function. For battery replacement, we recommend that you contact an AU­THORIZED SEIKO DEALER and request SEIKO SR927W battery. * If the alarm rings for more than 20 seconds a day, the battery life may be less than the specified period. * After the battery is replaced with a new one, set the time/calendar and adjust alarm and world time hands. l Battery life indicator When the battery nears its end, the small second hand moves at two-second intervals instead of normal one-second intervals. In that case, have the battery replaced with a new one as soon as possible. * While the small second hand is moving at two-second intervals, the alarm will not ring even if it is engaged. This is not a malfunction. * The watch remains accurate while the small second hand is moving at two-second intervals. 23 English